Pleated Screen Trial Set with 250 Eyelets, Manual Hand Press, Punch and Setting Dies for 6–6.5 mm / 0.236–0.256 in Eyelets Set00040SinDN

What Is the Pleated Screen Eyelet Trial Set?

This trial set brings together the machine, dies and eyelet components required to prepare pleated screen PVC strips and complete compatible metal eyelet installations.

The punch die prepares a 6 mm / 0.236 in round opening. The setting die closes the eyelet over the selected washer. The manual hand press operates the appropriate die for each process.

The set also includes 250 metal eyelets together with plastic and metal washer groups, allowing both washer types to be tested without purchasing a separate eyelet package.

Set Contents

• Manual hand press
• Punch die preparing a 6 mm / 0.236 in round PVC-strip opening
• Setting die for compatible 6–6.5 mm / 0.236–0.256 in eyelets
• 250 metal pleated screen eyelets
• Plastic washer group
• Metal washer group

How Does It Differ from the Other Sets?

The die-only set contains the punch and setting dies. The machine-assisted starter set adds the manual hand press.

This trial version includes the press and both dies, as well as 250 metal eyelets and both washer types. It therefore combines the equipment and application components in one set.

Functions of the Included Equipment

Punch die: Prepares the 6 mm / 0.236 in round opening required for the eyelet barrel.

Setting die: Closes the compatible standard-barrel eyelet over the selected plastic or metal washer.

Manual hand press: Operates the punch and setting dies through manual lever action.

Eyelets and washers: Allow trial installations with both the plastic and metal washer groups included in the set.

Technical Information

Eyelet Class and Prepared Hole Size

The 6–6.5 mm / 0.236–0.256 in value identifies the eyelet size class. The punch die prepares a 6 mm / 0.236 in round opening in the PVC strip.

The eyelet class and prepared-hole diameter describe different parts of the application and must not be treated as the same dimension.

Replacement Eyelet Compatibility

The included eyelets use a standard barrel structure. Replacement eyelets must not be selected by nominal size alone.

Outer diameter, barrel height, face profile and washer construction must match the setting die. Extra-long or differently shaped eyelets must not automatically be treated as interchangeable.

Frequently Asked Questions