20 mm Jeans Button with Logo - Elevate Your Denim Projects

20 mm / 0.79 in Logo Jeans Button with Black Oxide Finish

This 20 mm / approximately 0.79 in, 32L logo jeans button is a press-set metal closure for jeans, denim jackets, coats, waistcoats, overalls and similar garments. It is made from brass and has a dark black oxide finish with a fixed-cup lower structure.

The 20 mm cap is larger and more visually prominent than common 14 mm and 17 mm jeans buttons. It should be selected when the garment design, buttonhole and waistband or placket proportions can accommodate the larger button size.

When Should This Button Be Selected?

• When a large 20 mm / 0.79 in jeans button is required
• When a dark or aged-metal appearance suits the garment
• For black, charcoal, dark-indigo or washed denim
• When a logo-face press-set button is preferred
• For jeans, denim jackets, coats and heavy textile products
• For sampling, repairs, boutique production and workshop use

Size and Construction

What Does 20 mm / 32L Mean?

The 20 mm / 0.79 in measurement refers to the visible diameter of the upper button cap. The 32L value is the corresponding ligne measurement used for garment buttons.

A 20 mm button should not replace a 14 mm or 17 mm jeans button without checking the existing buttonhole, garment proportions, fabric thickness and installation tooling.

What Is a Fixed-Cup Jeans Button?

In a fixed-cup construction, the connection section beneath the visible cap does not move independently. The cup profile must work correctly with the lower component and the installation die.

A setting die produced for a different 20 mm button may not support the actual logo cap or fixed-cup profile correctly.

Using the Black Oxide Finish

The dark black oxide appearance can be combined with black denim, charcoal workwear, dark-indigo jeans, washed denim and garments using dark metal hardware.

Check the finish together with the garment wash and the colors of rivets, zippers, eyelets, buckles or logo plates used in the same design.

How Is It Different from Similar Buttons?

This model is defined by its 20 mm / 32L size, logo face, brass material, black oxide finish and fixed-cup construction.

It is larger than 14 mm / 22L and 17 mm / 27L jeans buttons. It is not the same as a swivel-cup, plastic-cup, zinc-alloy or differently plated button.

Typical Applications

• Jeans waistbands
• Denim jackets and coats
• Waistcoats and overalls
• Heavy denim skirts and shorts
• Workwear and heavy cotton textiles
• Denim bags and textile accessories
• Button replacement and repair work
• Samples and boutique collections

Installation Requirements

Use a jeans-button setting die that matches the actual upper-cap and fixed-cup profile. The die may be used with a compatible hand press, impact press or suitable installation machine.

The lower fastening component must suit the button structure and total material thickness. An unsuitable component can leave the button loose, tilted or incompletely locked.

Checks Before Installation

• Confirm the 20 mm / 0.79 in, 32L size.
• Confirm that the upper die matches the logo-face profile.
• Confirm that the lower die supports the fixed cup.
• Select the lower component according to material thickness.
• Seat the cap level inside the upper die.
• Adjust pressing force gradually.

Discounted Export-Surplus Package

The product is supplied as a discounted export-surplus package containing 50 buttons. It is suitable for repairs, samples, boutique production and workshop requirements.

Inspect several pieces for finish consistency, cup condition and setting-die compatibility before using the complete package in production.

Related Product Groups

• Jeans button models
• Brass and stainless-steel jeans buttons
• Jeans-button setting dies
• Manual hand press
• Manual impact press

Do not use the 14 mm or 17 mm dies displayed among the old related products. This 20 mm button requires correctly matched tooling.

Frequently Asked Questions

Content last updated: July 23, 2026 — E-Düğme