7 mm / 0.28 in Hole Cutter for Fabric, Leather and Eyelet Hole Preparation PDV00007DEL

7 mm / 0.28 in Hole Cutter for Fabric, Leather and Eyelet Hole Preparation

This 7 mm / 0.28 in hole cutter is a hard steel cutting tool used for preparing round holes on fabric, leather, synthetic leather, cardboard, bags, belts and textile accessories. It is designed for pre-cutting the hole before installing compatible eyelets or other fastening hardware that requires a 7 mm / 0.28 in opening.

Used Before the Setting Stage

This product is not an eyelet setting die, snap setting die or rivet setting die. It is used before the setting process to prepare the hole in the material. A correctly prepared hole helps the hardware parts sit more consistently on the fabric or leather surface and supports a more controlled installation process.

7 mm / 0.28 in Hole Size

The 7 mm / 0.28 in size can be evaluated for larger textile hardware, eyelet hole preparation, bag making, belt applications and accessory production. Since actual hardware dimensions may vary by model, supplier, inner diameter, outside diameter, height and washer structure, the final component size should be checked before ordering.

Dimensional Tolerance and Material Thickness

Hole diameter, hardware size, material thickness, material stretch, setting die fit and press pressure should be evaluated together. Small dimensional differences may be tolerated by the setting tool in some thin and medium-weight materials. On thick fabrics, tarpaulin-like surfaces, multi-layer leather or rigid materials, this tolerance is reduced. A sample test is recommended before serial production.

Applications for Fabric, Leather, Bags and Belts

This cutter can be used for fabric production, leatherwork, synthetic leather goods, bag making, belt holes, cardboard products, textile accessories, craft projects, sample preparation and hole preparation before eyelet setting. The final hole quality may vary depending on material density, thickness and cutting support.

SEO-Focused Related Product and Category Links

For related installation tools, review fastening tools and dies. For compatible hardware groups, visit eyelets and grommets. For the setting stage after hole preparation, review eyelet setting dies. For controlled manual application, review the hand press machine.

Usage Information

The hole cutter should be used with a suitable lower base or cutting support. For a cleaner cut, the material should be positioned securely, the cutter should be aligned vertically and controlled pressure should be applied. On hard or thick materials, the cutting edge should not be forced and should be checked regularly.

Package Contents

• 1 hole cutter, 7 mm / 0.28 in
• 1 lower base
• Total: 1 hole cutting tool set

Application Areas

• Hole preparation before eyelet or textile hardware setting
• Fabric, canvas and textile surfaces
• Leather and synthetic leather applications
• Bag, belt, wallet and accessory production
• Cardboard, craft and handmade projects
• Sample making and workshop use

Before Ordering

The hole size should be selected according to the eyelet or accessory to be installed. If it will be used before setting eyelets or other hardware, the actual inner diameter, outside diameter, height, material thickness and setting die compatibility should be checked together. Thin materials may allow more tolerance, while thick fabrics, multi-layer leather and rigid materials reduce tolerance.

Not included: Eyelets, snap fasteners, rivets, setting dies, presses, hand tools, cutting boards, converter adapters and other auxiliary equipment are not included.

Frequently Asked Questions

What is this product used for?

It is used to cut 7 mm / 0.28 in holes on fabric, leather, synthetic leather, cardboard and similar materials.

Does this tool set eyelets?

No. This is not an eyelet setting die. It is used for hole preparation before the setting stage.

Can it be used before eyelet setting?

It can be evaluated for hole preparation before setting compatible eyelets or textile hardware. The actual hardware size, material thickness and setting die fit should be checked.

Does tolerance change on thick fabrics?

Yes. Tolerance is reduced on thick fabrics, multi-layer leather and rigid materials. A sample test is recommended before production use.

What is included in the package?

The package includes 1 hole cutter and 1 lower base.