14 mm Zinc Alloy Sew-On Hook Clasp – E 1796
For European tailoring and dressmaking, E 1796 is a 14 mm zinc-alloy sew-on hook clasp for suitable jackets, dresses and bouclé garments. It can provide a discreet fastening where a visible button is not part of the design.
Product dimensions
- Model: E 1796
- Material: zinc alloy (zamak)
- Measurements: 14 mm / 0.55 in sewing width; 20 mm / 0.79 in overall length; 4.5 mm / 0.18 in hook height
- Attachment: two-hole sewing section
What it solves
For a bouclé jacket or dress, the clasp provides an alternative to a visible button. Position it on a supported fabric area and check that the closure lies flat when worn.
Choosing and sewing
Use the two sewing holes with suitable thread and, where necessary, fabric reinforcement. Confirm that the matching receiving piece fits the hook; another model's eye should not be assumed compatible. The stated dimensions do not establish a load rating.
Before ordering
Check the current finish, quantity and pack choices on E-Düğme. Confirm the colour against other metal trims on a physical sample.
Frequently asked questions
Is this a sew-on clasp? Yes, its product record specifies a two-hole sewing section.
Will it fit every jacket? No; test the hook, receiving eye and fabric layers on the actual garment.
Can I use a press die? Press installation is not established for this sew-on model.
Frequently Asked Questions About the 14 mm Sew-On Clasp
What does 14 mm refer to?
It is the sewing width, 14 mm (0.55 in); overall length is 20 mm (0.79 in), and hook height is 4.5 mm (0.18 in).
How is it attached?
Sew through the two attachment holes with appropriate thread and reinforce the fabric if needed.
Does it require a setting press?
No. This is a two-hole sew-on clasp.
Will any receiving eye fit?
No. Test the counterpart's opening and shape with the hook.
What garments may suit it?
Selected tailored jackets, bouclé garments and dresses, subject to sample testing.
Is the receiving eye included?
Verify the package contents before ordering.