40 mm / 1.57 in Eyelet Setting Die for Large Grommet Installation
This Eyelet Setting Die is used to install compatible large eyelets in the 40 mm / 1.57 in inner diameter group. It supports controlled setting of the eyelet capsule and washer on tarpaulins, tents, curtains, awnings, banners, vinyl prints, technical textiles, leather and other reinforced materials.
Large eyelets require accurate matching between the eyelet, washer, material thickness and setting die. The visible inner diameter is only one part of the selection. Capsule outside diameter, barrel height, washer opening and the structure of the material stack must also be checked before production.
Setting Die and Punching Die Are Different Tools
This product is an Eyelet Setting Die. It does not create the hole in the material. The hole is prepared first with a suitable punching tool, then the eyelet and washer are set with this die.
- Eyelet Setting Die: Sets the eyelet and washer under pressure.
- Eyelet Punching Die: Prepares the material hole before installation.
- Press or machine: Supplies the controlled force for the die.
Do not choose the material hole size from the visible 40 mm / 1.57 in opening alone. The actual capsule, washer, barrel height and material behavior must be considered together.
Compatible Large Eyelet Group
This die is intended for compatible eyelets in the 40 mm / 1.57 in inner diameter group. Stainless, galvanized, steel, brass or other eyelet types may have different capsule and washer dimensions even when the visible opening looks similar.
Compatible examples include the 40.3 mm / 1.59 in stainless curtain eyelet and galvanized 40 mm tarpaulin eyelet options where the actual capsule and washer geometry match the die.
Typical Applications
- Tarpaulins and truck covers
- Tents, awnings, shade systems and outdoor textiles
- Curtains, drapery panels and interior textile installations
- Banners, vinyl prints and advertising panels
- Technical textiles and reinforced fabrics
- Leather, faux leather, bags, covers and workshop applications
- Products requiring wide cord, rope, tube or fixing-point access
Press and Connection Compatibility
Use this die with a physically compatible hand press, impact tool, electric machine or pneumatic machine. The available 1/4 in and M6 options are die-connection standards and must be checked against the actual press holder.
1/4 in and M6 are different thread standards. Confirm the holder, thread diameter, thread pitch, setting axis and die seating surface before use. A connection adapter may be required when the press and die standards are not the same.
Correct Application Sequence
- Check the actual capsule and washer dimensions of the selected large eyelet.
- Evaluate the material thickness, hardness, reinforcement and layer count.
- Prepare the material hole with a separate punching tool if required.
- Place the eyelet capsule and washer in the correct direction.
- Fit the upper and lower setting die into compatible equipment.
- Apply centered and controlled pressure.
- Inspect the front surface, washer closure, material deformation and rope or cord passage.
Before Ordering
- This die is for compatible 40 mm / 1.57 in inner diameter large eyelets.
- Eyelets, washers, press equipment, punching tools and adapters are not included.
- A separate punching tool may be required for material preparation.
- The eyelet barrel height must suit the total material thickness.
- Sample testing is recommended for reinforced, coated, thick or multilayer materials.
Frequently Asked Questions
Which eyelets is this die designed for?
It is designed for compatible large eyelets in the 40 mm / 1.57 in inner diameter group.
Does this die punch the hole?
No. This is a setting die only. Use a separate punching tool when a material hole needs to be prepared.
Are eyelets and washers included?
No. Eyelets, washers, press equipment, adapters and punching tools are separate items.
Can it be used with every 40 mm eyelet?
Not automatically. Capsule diameter, washer dimensions, barrel height and material thickness must match the die surfaces.
Can it be used with a manual hand press?
Yes, when the die holder, thread standard and press alignment are physically compatible.
Is it suitable for tarpaulins and tents?
Yes, when the selected large eyelet, washer and material thickness are compatible with the die.
Why is sample testing important?
Large eyelet applications can be affected by material thickness, coating, reinforcement and barrel height. A sample confirms the setting result before repeated production.