21 mm / 0.83 in Flat Brass Eyelet Setting Die KLP0032

Product-Specific Setting Die for a 21 mm Flat Brass Eyelet

This Eyelet Setting Die is produced for the 21 mm / 0.83 in flat brass eyelet with a 31.8 mm / 1.25 in outer diameter and a 4.7 mm / 0.19 in barrel height. It is intended to position and close the compatible eyelet and metal washer on a pre-punched material surface.

The tool should not be selected only by a trade size or product number. Eyelet outer diameter, barrel height, face profile and washer construction must match the setting die.

Compatible Eyelet Dimensions

• Inner diameter: 21 mm / 0.83 in
• Outer diameter: 31.8 mm / 1.25 in
• Barrel height: 4.7 mm / 0.19 in
• Eyelet material: Brass
• Metal washer outer diameter: 32 mm / 1.26 in
• Metal washer inner diameter: 22 mm / 0.87 in
• Metal washer thickness: 1.2 mm / 0.05 in

Setting and Punching Are Separate Operations

This product performs the setting stage only. It does not punch the material and is not a Self-Piercing Eyelet Setting Die. The application surface must first be prepared with a correctly sized hole. The eyelet and washer are then positioned and closed with the setting die and a compatible press.

Related setting tool types can be compared in the Grommet Setting Dies and Application Tools category.

Typical Applications

• Tarpaulins and truck covers
• Curtains and decorative textiles
• Tents, awnings and shade systems
• Banners and vinyl display materials
• Protective covers and technical textiles
• Wide cord, rope and fastening passages

Press and Machine Compatibility

The connection standard of the die must match the selected press or setting machine. Compatibility with a particular hand press, electric machine or pneumatic system should not be assumed before the connection dimensions are confirmed.

A sample setting test is recommended before repeat production, especially when working with coated tarpaulins, reinforced fabrics, multiple layers or materials with varying thickness.

What to Check Before Ordering

• Actual eyelet inner and outer diameters
• Barrel height and face profile
• Washer dimensions and construction
• Total material thickness
• Press or machine connection standard
• Required hole-preparation method

Other sizes and profiles are available under Flat Brass Eyelets.

Frequently Asked Questions

Which eyelet is this setting die made for?

It is made for the flat brass eyelet with a 21 mm / 0.83 in inner diameter, 31.8 mm / 1.25 in outer diameter and 4.7 mm / 0.19 in barrel height.

Does this die punch the material?

No. It is a standard setting die used after a correctly sized hole has been prepared.

Is it a self-piercing setting die?

No. It does not combine punching and setting in one operation.

Will it fit another eyelet with the same trade size?

Compatibility should not be assumed. Outer diameter, barrel height, face profile and washer construction must be compared.

Which press can be used?

The die and press connection standards must match. The connection dimensions should be confirmed before ordering.

Are the eyelet and washer included?

The current source information does not confirm that consumable eyelets or washers are included. Package contents must be confirmed before publication.