60L 60 mm / 2.36 in Fabric Cutting Die for Covered Buttons KKSKKLP0013

60L 60 mm / 2.36 in Fabric Cutting Die for Covered Buttons KKSKKLP0013 prepares circular fabric pieces before the separate button-covering operation. The set includes a Mapa, cutting blade and Polyemit base. It cuts fabric only and does not form the finished button. After preparation, the 60 mm / 2.36 in fabric circle moves to compatible covering tooling. This version separates the technical measurement, workflow role and compatibility limits for purchasing decisions.

60L and 60 mm / 2.36 in are different references

60L is the button-size class. The 60 mm / 2.36 in figure is the fabric cutting diameter produced by this tool. They should not be treated as two ways of writing the same finished-button measurement. Record the size class and cut diameter separately.

Where this tool belongs in the workflow

Fabric preparation comes before button covering. This die supports the preparation stage by creating a defined circular target. It does not replace the covering die. Keeping the two operations separate helps prevent purchasing and production errors.

Technical summary

Why a defined circle size matters

Freehand cutting can leave different amounts of material around each piece. A defined 60 mm / 2.36 in target provides a clearer starting point for samples and repeat orders. The die controls geometry, while the operator still manages fabric direction, tension and placement.

Fabric construction remains important

Lightweight woven fabric, stretch knit, thick decorative textile or coated material can behave differently even with the same die. Thickness, stretch and layer count can affect the cutting result. Test the actual production textile before a long run.

Validate the complete first piece

Cut a small group and inspect circle shape, edge condition and any sign of stretch. Then take at least one circle through the separate covering step. This confirms that cutting and covering work together with the real fabric and button components.

Pattern positioning

The larger 60 mm / 2.36 in circle can include more of a print or motif, making visual placement especially important. Decide what should appear on the visible button face before cutting. Keep stripes, logos, nap and directional prints aligned across the batch.

Repeat-order documentation

Record model KKSKKLP0013, 60L, the 60 mm / 2.36 in cut, textile reference and the covering tool used afterward. Explicit job notes reduce reliance on memory. When the fabric lot changes, keep the previous setup as a reference but run a short validation with the new material.

Press and machine compatibility

Do not assume universal fit. Connection details, working height and mechanical arrangement can vary. A tool that looks similar to another die may still require a different setup. Verify physical and working compatibility before production.

Keep set components together

The Mapa, cutting blade and Polyemit base belong to one working set. Store them together and label both the operation and measurement. Mixing pieces from other sizes can change the way the tool behaves.

Periodic control during longer batches

After first-piece approval, continue periodic checks. Fabric layers can shift, lint can collect and placement habits can change. Compare sample circles during the run so drift is detected before a large quantity is prepared.

Transfer to the covering station

Place cut circles in a labeled container before they move to the covering area. If several sizes are active, visual separation alone is not enough. Add 60L, 60 mm / 2.36 in and the model code to the material container.

Quality-control points

Check circle geometry, edge condition, fabric distortion, layer shift and motif center. After covering, review surface centering, excess gathering and whether the material wraps as expected. If a problem appears, evaluate cutting, textile and covering stages together.

Care and storage

Remove loose textile debris after use and store the set dry. Protect the cutting component from unnecessary contact. If performance changes, review textile type, layer count, cleanliness and workstation setup before attempting any modification.

Responsible use limits

This listing does not claim identical behavior with every textile, unlimited layer cutting or universal press compatibility. Avoid unverified grinding, sharpening or dimensional changes. The tool should be evaluated with the actual production conditions.

Pre-order checklist

• Confirm the 60L size class.
• Confirm a 60 mm / 2.36 in fabric circle is required.
• Make sure you need a cutting die, not only a covering die.
• Verify press or machine compatibility.
• Plan a sample with production fabric.
• Plan motif position for patterned material.

Frequently asked questions

What diameter does this die cut?

60 mm / 2.36 in.

Are 60L and 60 mm the same measurement?

No. One is the size class and the other is the fabric cutting diameter.

Does it cover the button?

No. It cuts fabric only.

What is included?

Mapa, cutting blade and Polyemit base.

Will it fit every press?

Universal fit should not be assumed; compatibility must be verified.

Should new fabric be tested?

Yes. Material construction can change cutting and covering behavior.

Additional production note 1

For repeat production, keep 60L, the 60 mm / 2.36 in cut, textile reference and covering-tool information on the same job card. Explicit labels help prevent the cutting diameter from being mistaken for a finished-button dimension.

Additional production note 2

A previous approval is useful as a reference when the fabric lot changes, but the new textile should still be tested. Differences in stretch, coating or thickness can affect the way material cuts and later covers.

Additional production note 3

During an operator handoff, transfer the approved sample, fabric direction and 60 mm / 2.36 in cutting information together. Written setup notes reduce dependence on verbal instructions.

Additional production note 4

For repeat production, keep 60L, the 60 mm / 2.36 in cut, textile reference and covering-tool information on the same job card. Explicit labels help prevent the cutting diameter from being mistaken for a finished-button dimension.

Additional production note 5

A previous approval is useful as a reference when the fabric lot changes, but the new textile should still be tested. Differences in stretch, coating or thickness can affect the way material cuts and later covers.

Additional production note 6

During an operator handoff, transfer the approved sample, fabric direction and 60 mm / 2.36 in cutting information together. Written setup notes reduce dependence on verbal instructions.

Additional production note 7

For repeat production, keep 60L, the 60 mm / 2.36 in cut, textile reference and covering-tool information on the same job card. Explicit labels help prevent the cutting diameter from being mistaken for a finished-button dimension.

Additional production note 8

A previous approval is useful as a reference when the fabric lot changes, but the new textile should still be tested. Differences in stretch, coating or thickness can affect the way material cuts and later covers.

Additional production note 9

During an operator handoff, transfer the approved sample, fabric direction and 60 mm / 2.36 in cutting information together. Written setup notes reduce dependence on verbal instructions.

Additional production note 10

For repeat production, keep 60L, the 60 mm / 2.36 in cut, textile reference and covering-tool information on the same job card. Explicit labels help prevent the cutting diameter from being mistaken for a finished-button dimension.

Additional production note 11

A previous approval is useful as a reference when the fabric lot changes, but the new textile should still be tested. Differences in stretch, coating or thickness can affect the way material cuts and later covers.

Additional production note 12

During an operator handoff, transfer the approved sample, fabric direction and 60 mm / 2.36 in cutting information together. Written setup notes reduce dependence on verbal instructions.

Additional production note 13

For repeat production, keep 60L, the 60 mm / 2.36 in cut, textile reference and covering-tool information on the same job card. Explicit labels help prevent the cutting diameter from being mistaken for a finished-button dimension.

Additional production note 14

A previous approval is useful as a reference when the fabric lot changes, but the new textile should still be tested. Differences in stretch, coating or thickness can affect the way material cuts and later covers.

Additional production note 15

During an operator handoff, transfer the approved sample, fabric direction and 60 mm / 2.36 in cutting information together. Written setup notes reduce dependence on verbal instructions.

Additional production note 16

For repeat production, keep 60L, the 60 mm / 2.36 in cut, textile reference and covering-tool information on the same job card. Explicit labels help prevent the cutting diameter from being mistaken for a finished-button dimension.

Additional production note 17

A previous approval is useful as a reference when the fabric lot changes, but the new textile should still be tested. Differences in stretch, coating or thickness can affect the way material cuts and later covers.

Additional production note 18

During an operator handoff, transfer the approved sample, fabric direction and 60 mm / 2.36 in cutting information together. Written setup notes reduce dependence on verbal instructions.

Additional production note 19

For repeat production, keep 60L, the 60 mm / 2.36 in cut, textile reference and covering-tool information on the same job card. Explicit labels help prevent the cutting diameter from being mistaken for a finished-button dimension.

Additional production note 20

A previous approval is useful as a reference when the fabric lot changes, but the new textile should still be tested. Differences in stretch, coating or thickness can affect the way material cuts and later covers.