32L / 20 mm / 0.79 in Fabric Cutting Die for Cover Buttons KKSKKLP0002

What Is a 32L Fabric Cutting Die Used For?

This 32L Fabric Cutting Die prepares the circular fabric pieces used for 20 mm / 0.79 in fabric-covered buttons. When used with a physically compatible press, it cuts a 32 mm / 1.26 in circular fabric piece. The cut fabric circle is then placed over the button shell before the covering stage.

This is a Fabric Cutting Die, not a Fabric Button Covering Die. It prepares the fabric but does not form fabric around the button shell or complete the final button assembly.

Why Does a 20 mm Button Need a 32 mm Fabric Circle?

The finished visible diameter of the cover button is 20 mm / 0.79 in, while the cutting die produces a 32 mm / 1.26 in fabric circle. The total diameter difference is 12 mm / 0.47 in.

That difference creates approximately 6 mm / 0.24 in of fabric allowance on each side. During covering, the extra fabric folds inward around the button edge and gathers toward the reverse side. This allowance helps the fabric wrap the face and edge of the button without leaving an exposed border.

• Fabric cutting diameter: 32 mm / 1.26 in
• Finished button diameter: 20 mm / 0.79 in
• Total diameter difference: 12 mm / 0.47 in
• Approximate allowance per edge: 6 mm / 0.24 in

What This Die Does

This tool cuts a 32 mm / 1.26 in circular fabric piece. When used on layered fabric, it creates a circular cut-out and separates the fabric disc used for cover-button work.

It does not cover the button shell with fabric. A separate Fabric Button Covering Die that is physically compatible with the selected 32L button shell is required for the covering stage.

Fabric Cutting and Fabric Covering Are Separate Steps

1. Cut a 32 mm / 1.26 in fabric circle.
2. Place the fabric over a compatible 20 mm / 0.79 in button shell.
3. Use a matching Fabric Button Covering Die for the covering stage.
4. Allow the approximately 6 mm / 0.24 in edge allowance to fold inward.
5. Inspect the finished button for folds, exposed edges and uneven tension.

Layered Fabric Cutting

For thinner fabrics, cutting approximately 5–6 layers together can make preparation more efficient. For thicker fabrics, approximately 3–4 layers may be easier to control. The ideal layer count should be confirmed through sample cutting based on fabric thickness, stretch, texture and press force.

Test velvet, stretch fabric, thick textiles, satin, slippery fabrics, plaid patterns, directional stripes and multilayer constructions before repeated production.

Press Compatibility

This die can be used with a compatible hand-operated press or fabric-covering machine after confirming the actual die-holder and press connection. The store lists a Manual Hand Press as a complementary item.

Do not assume that visually similar die holders, press heads or threads are mechanically interchangeable. The cutting die, button shell, covering die and press should be checked together as one working system.

Frequently Asked Questions

What diameter does this die cut?

It cuts circular fabric pieces with a diameter of 32 mm / 1.26 in.

Why is the fabric circle larger than the 20 mm button?

The additional fabric creates the allowance needed to fold inward around the button edge during covering.

How much fold-in allowance does it create?

The total diameter difference is 12 mm / 0.47 in, which leaves approximately 6 mm / 0.24 in of allowance on each edge.

Does this tool cover the button with fabric?

No. It cuts the fabric circle only. A separate Fabric Button Covering Die is required for the covering stage.

Can several fabric layers be cut together?

Yes. Test approximately 5–6 layers for thinner fabrics and 3–4 layers for thicker materials, then adjust according to cutting quality and press force.

Can it be used with a hand press?

Yes, when the die holder and press connection are physically compatible.