36L / 22 mm / 0.87 in Fabric Cutting Die for Cover Buttons KKSKKLP0001

What Is a 36L Fabric Cutting Die Used For?

This 36L Fabric Cutting Die prepares the fabric circles used for 22 mm / 0.87 in fabric-covered buttons. When used with a suitable press, it cuts a clean 36 mm / 1.42 in circular fabric piece. That piece is then placed over the button shell before covering.

This is a fabric-cutting die, not a button-covering die. It does not form the fabric around the button shell. Its job is to prepare the correct fabric circle before the covering stage.

Why Does a 22 mm Button Need a 36 mm Fabric Circle?

The finished visible diameter of the cover button is 22 mm / 0.87 in, while the fabric cutting die produces a 36 mm / 1.42 in circle. The total difference is 14 mm / 0.55 in.

That difference creates approximately 7 mm / 0.28 in of fabric allowance on each side of the button. During the covering process, the extra fabric folds inward around the button edge and gathers toward the reverse side. This allowance helps the fabric cover the face and edge of the button without leaving an exposed border.

• Fabric cutting diameter: 36 mm / 1.42 in
• Finished button diameter: 22 mm / 0.87 in
• Total diameter difference: 14 mm / 0.55 in
• Approximate allowance per edge: 7 mm / 0.28 in

How the Fabric Circle Is Used

The cutting die produces a 36 mm circular fabric piece. Depending on how the fabric is positioned, the press action creates a circular opening in the layered fabric and releases the cut fabric disc for button covering.

The fabric disc is placed over the compatible 22 mm button shell. When the shell is pressed in the matching Fabric Button Covering Die, the excess fabric around the edge folds inward and toward the rear of the button.

Fabric Cutting Die and Covering Die Are Different Tools

A Fabric Cutting Die prepares the fabric circle. A Fabric Button Covering Die shapes the cut fabric around the button shell or compatible snap cap. These are separate stages and require different tools.

1. Cut a 36 mm / 1.42 in fabric circle.
2. Place the fabric over the 22 mm / 0.87 in button shell or compatible snap cap.
3. Use the matching covering die to form the fabric around the component.
4. Allow the excess fabric to fold inward around the edge.
5. For snap applications, perform final snap assembly with a separate Snap Setting Die.

Use with Fabric-Covered Snap Caps

When the snap-cap geometry and cutting requirement are confirmed, this die can prepare fabric circles for the covering stage of compatible fabric-covered snap caps.

It does not cover the cap, and it does not install the snap fastening mechanism. The cap must first be covered with a compatible Fabric Button Covering Die, then assembled with its matching socket and snap components using a separate Snap Setting Die.

Fabric Selection and Sample Work

Fabric thickness, stretch, surface texture and pattern direction affect both cutting quality and the final covered-button appearance. Test the actual fabric before starting repeated production, especially with velvet, stretch fabrics, thick textiles, satin, slippery fabrics, plaid patterns, stripes and multilayer constructions.

The 36 mm circle provides the standard covering allowance for the 22 mm button system. Very thick or unusually stiff materials can alter how the allowance folds around the reverse side, so sample work remains important.

Press Compatibility

This die can be used with a compatible hand press or fabric-covering machine after confirming the actual die-holder and press connection. The live product page lists the Manual Hand Press as a complementary item.

Do not assume that visually similar press holders or thread sizes are mechanically interchangeable. Confirm the physical die connection before use.

Before Ordering

• This die cuts 36 mm / 1.42 in fabric circles.
• It is designed for 36L / 22 mm / 0.87 in fabric-covered button work.
• The 14 mm / 0.55 in difference creates approximately 7 mm / 0.28 in of fold-in allowance on each button edge.
• This product cuts fabric; it does not cover button shells.
• A separate covering die is required to form the fabric around the button or cap.
• A separate Snap Setting Die is required for final snap closure assembly.
• Test thick, stretch, textured or patterned fabrics before repeated production.

Frequently Asked Questions

What diameter does this die cut?

It cuts 36 mm / 1.42 in diameter fabric circles.

Why is the cutting diameter larger than the 22 mm button?

The additional material creates the allowance needed to fold the fabric inward around the button edge during the covering process.

How much fabric allowance does it create?

The 36 mm circle is 14 mm larger in total diameter than the 22 mm button. That leaves approximately 7 mm / 0.28 in of fold-in allowance on each side.

Does this tool cover the button with fabric?

No. It cuts the fabric circle. A separate Fabric Button Covering Die is required to form the fabric around the button shell.

Can it be used for fabric-covered snap buttons?

It can prepare the fabric circle for a compatible snap cap when the cap geometry is confirmed. It does not complete fabric covering or snap assembly.

Can it be used with a manual hand press?

Yes, when the die-holder and press connection are physically compatible.