24 mm (0.94 in) Circular Cut: Specify the Opening First
This size identifies the nominal circular opening, not the outside dimension of the hardware installed afterward. For reliable product selection, start with the opening required by the finished assembly. Confirm the actual material thickness and test a representative sample before repeating the cut.
Comparing 22 mm, 24 mm, and 26 mm Cutters
A 22 mm cutter produces an opening 2 mm narrower in diameter than the selected 24 mm size, while 26 mm is 2 mm wider. Those differences should not be treated as interchangeable tolerances. Once an oversized hole has been cut, the removed material cannot be restored.
Selection Notes for e-Düğme Customers
Check the intended opening against the component drawing. A matching numerical size on a grommet, fastener, or covered-button tool does not by itself establish compatibility.
Technical Decision Table
| Item | Guidance |
|---|
| Nominal cut | 24 mm / 0.94 in |
| Next smaller comparison | 22 mm |
| Next larger comparison | 26 mm |
| Press and fitting | Check against the actual machine |
| Stacked materials | Trial cut using production layers |
Avoiding a Selection Mistake
Do not confuse a cutting punch with a setting die: one prepares a hole, while the other installs the component. They are distinct tools even when the product names refer to the same nominal size.
24 mm / 0.94 in Large-Diameter Hole Cutter
24 mm / 0.94 in large hole cutter prepares repeatable circular openings in compatible workshop materials. The listed size is the actual cutting diameter.
It is a cutting tool, not a hardware-setting die. Select by the real opening required by the application.
Cutting System
The large-diameter system uses a blade, guide/mapa and Polyemit support. Presses and setting dies are separate.
Applications
- Fabric and canvas
- Leather and synthetic leather
- Tarpaulin and awning materials
- Bags and accessories
- Pre-installation hole preparation
Cutting vs. Setting
The cutter removes material; a setting die installs the hardware. These are separate operations.
Press Capacity
Verify physical connection, working height and press capacity before using manual, impact, electric or pneumatic equipment.
Material Thickness
Thickness, stiffness, stretch and layer count affect edge quality. Test the real production material before repeat work.
Tool Care
- Keep the cutting edge away from bare metal.
- Keep the lower support level.
- Align the cutter squarely.
- Use controlled pressure.
- Inspect the blade if incomplete cuts appear.
Covered-Button Distinction
This page is organized by actual hole diameter. Covered-button listings separately show ligne size and finished button diameter.
Frequently Asked Questions
What diameter does it cut?
The actual cut diameter is 24 mm / 0.94 in.
Does it install hardware?
No. It prepares the opening only.
Which materials can it cut?
Compatible fabric, leather, canvas, tarpaulin, cardboard and technical textiles.
What should be checked on the press?
Connection type, working height and available press force.
Can it prepare covered-button fabric?
Only where that physical cutter relationship is verified.
.jpg-40x40.webp "Magnetic Snaps Buttons"){kind=small}
.jpg-40x40.webp "Prong Snap Fasteners for Baby Clothes"){kind=small}
.jpg-40x40.webp "Curved Snaps Buttons"){kind=small}
.jpg-40x40.webp "Snap Fasteners Half Dome type"){kind=small}
-no5-k0010%20(3).jpg-40x40.webp "Eyetlets"){kind=small}
-K0014.png-40x40.webp "Steel Eyelets and Iron Metal Grommets"){kind=small}
.jpg-40x40.webp "Flat Brass Eyelets and Grommets"){kind=small}
.jpg-40x40.webp "Aluminum Eyelets and Grommets"){kind=small}
.jpg-40x40.webp "Galvanized Eyelets and Grommets"){kind=small}
.jpg-40x40.webp "Grommet Punching Dies"){kind=small}
.jpg-40x40.webp "Hole Cutter Tools and Punching Dies"){kind=small}
.jpg-40x40.webp "Pearls Types"){kind=small}
.jpg-40x40.webp "Rivets"){kind=small}
.jpg-40x40.webp "Water-Repellent Jacket Zippers"){kind=small}
.jpg-40x40.webp "Tires"){kind=small}
.jpg-40x40.webp "Round Braided Elastic Cord"){kind=small}
.png-40x40.webp "Enameled Buttons"){kind=small}
.png-40x40.webp "Two Hole Sewing Buttons"){kind=small}
.jpg-40x40.webp "Carabiner Clips, Snap Hooks and Bag Hooks"){kind=small}
-PhotoRoom.png-40x40.webp "Spring Rings, Key Rings and Snap Clamps"){kind=small}
.png-40x40.webp "Hook and Eye Closures Sew-On"){kind=small}
.png-40x40.webp "Bag Making Kits"){kind=small}
.png-40x40.webp "Continuous Zipper Sets"){kind=small}
.jpg-40x40.webp "Bra Underwires"){kind=small}
-no5-k0010%20(3).jpg-590x590.webp "Eyelets and Grommets")
.jpg-590x590.webp "Rivets")
.webp-576x576.webp "24 mm / 0.94 in Hole Cutter PDV00240DEL")
.webp-576x576.webp "24 mm / 0.94 in Hole Cutter PDV00240DEL")
.webp-576x576.webp "24 mm / 0.94 in Hole Cutter PDV00240DEL")
.webp-576x576.webp "24 mm / 0.94 in Hole Cutter PDV00240DEL")
.webp-576x576.webp "24 mm / 0.94 in Hole Cutter PDV00240DEL")
.webp-576x576.webp "24 mm / 0.94 in Hole Cutter PDV00240DEL")
.webp-576x576.webp "24 mm / 0.94 in Hole Cutter PDV00240DEL")
.webp-576x576.webp "24 mm / 0.94 in Hole Cutter PDV00240DEL")
.webp-576x576.webp "24 mm / 0.94 in Hole Cutter PDV00240DEL")
.webp-80x80.webp "24 mm / 0.94 in Hole Cutter PDV00240DEL")
.webp-80x80.webp "24 mm / 0.94 in Hole Cutter PDV00240DEL")
.webp-80x80.webp "24 mm / 0.94 in Hole Cutter PDV00240DEL")
.webp-80x80.webp "24 mm / 0.94 in Hole Cutter PDV00240DEL")
.webp-80x80.webp "24 mm / 0.94 in Hole Cutter PDV00240DEL")
.webp-80x80.webp "24 mm / 0.94 in Hole Cutter PDV00240DEL")
.webp-80x80.webp "24 mm / 0.94 in Hole Cutter PDV00240DEL")
.webp-80x80.webp "24 mm / 0.94 in Hole Cutter PDV00240DEL")
.webp-80x80.webp "24 mm / 0.94 in Hole Cutter PDV00240DEL")
.webp-185x185.webp "Punch Set with 6 mm / 0.24 in, 7 mm / 0.28 in, 8 mm / 0.31 in, 9 mm / 0.35 in and 12 mm / 0.47 in Hole Punch Tips EDPCH0001")
.webp-185x185.webp "1–15 mm / 0.039–0.591 in Padova Hole Cutter Collection with 18 Cutter Sets and Long-Handle Striking Tool PDVSET0015EL")
.webp-185x185.webp "2 mm / 0.08 in Hole Cutter for Pins, Snap Fasteners, Rivets and Micro Hardware PDV00020DEL")
.webp-185x185.webp "3 mm / 0.12 in Hole Cutter for Leather, Fabric and Craft Materials PDV00030DEL")
.webp-185x185.webp "Hole Punching Die 15 mm / 0.59 in PDV000150DEL")
.webp-185x185.webp "9 mm / 0.35 in Hole Cutter for Fabric, Leather, Bags, Belts and Tarpaulin PDV00090DEL")
.webp-185x185.webp "6 mm / 0.24 in Hole Cutter for Leather, Fabric and Eyelet Hole Preparation PDV00060DEL")
.webp-185x185.webp "2.5 mm / 0.10 in Hole Cutter for Pins, Snap Fasteners, Rivets and Small Hardware PDV000025DEL")
.webp-185x185.webp "Hole Punching Die 14 mm / 0.55 in PDV000140DEL")
.jpg-185x185.webp "Pants and Skirt Metal Zipper 18 cm / 7.1 in #4.5 Nickel-Plated Navy Blue ZPM0001PNT")
.webp-185x185.webp "15 mm Snap Button Color and Finish Test Set – 4 Color Snap Packs + KLP0015 Mounting Die Included – Hand Press Not Included SET-15MM-CITCIT-400")
.jpeg-185x185.webp "15 mm Plastic Snap Fastener Stainless Bottom Piece Set 100 pcs/pkt ERC0015PLPPK")
.jpeg-185x185.webp "Alfa Snap Button 15 mm / 0.59 in Stainless Steel 75 Sets C0001PPK")
.jpeg-185x185.webp "17 mm / 0.67 in Stainless Steel Alpha Curved Snap Fasteners, 75 Sets C0001P17PK")
.jpeg-185x185.webp "10 mm / 0.39 in VT2 Mini 54 Stainless Steel Wallet Snap Fasteners, 100 Sets ERC00P10PK")
.jpeg-185x185.webp "15 mm / 0.59 in Stainless Steel 61 System Curved Snap Fasteners, 75 Sets C0004P15PK")
.jpeg-185x185.webp "SewOn Snap fasteners 10 mm 16L / 25/64\" Stainless Steel 150 Pcs/Pack ERD100PR4PK")
.jpeg-185x185.webp "Sew Snap Button 15 mm 24L 5/8\" Stainless Steel 150 Pcs/Pack Four Holes ERD150P4PK")
.webp-185x185.webp "9.5 mm / 0.37 in Silver (Nickel) Stainless Domed Eyelet – 250-Piece Pack ER0024PPK")
.jpeg-185x185.webp "8 mm / 0.31 in Silver (Nickel) Stainless Domed Eyelet – 500-Piece Pack ER0005PPK")
.jpeg-185x185.webp "6 mm / 0.24 in Silver (Nickel) Stainless Domed Eyelet – 750-Piece Pack ER0004PPK")
.jpeg-185x185.webp "5 mm / 0.20 in Silver (Nickel) Stainless Eyelet – 750-Piece Pack ER0003PPK")