Hole Punching Die 14 mm / 0.55 in PDV000140DEL

14 mm / 0.55 in Hole Punching Die for Large Hole Preparation

This 14 mm / 0.55 in hole punching die is designed to prepare clean, controlled and repeatable large holes on tarpaulin, awning fabric, tents, leather, bags, belts and technical textile materials. A correctly prepared hole helps compatible eyelets, cords, lacing systems and accessories sit more evenly on the material.

It can be considered for large-diameter applications such as tarpaulin tie points, awning and tent connections, heavy-duty bags, leather accessories, belt fittings and technical textile products. The hole diameter, accessory inner diameter, material thickness and final setting method should always be checked together.

General Information and Compatibility Note

This product is a hole punching die, not an eyelet, rivet, snap or accessory setting die. It is used to prepare the hole before installation. A separate compatible setting die is required when the selected accessory needs to be fixed to the material.

It can be used before applications that require a 14 mm / 0.55 in hole. Eyelet inner diameter, barrel height, washer structure, material thickness and setting die compatibility must be checked before use.

This product can be used with hand striking tools, manual hand presses, impact presses, electric machines and pneumatic machines when the tool connection and size compatibility are correct.

Hand tools, manual presses and machines are not included in the standard product package and should be selected separately if required.

Compatible Products and Add-ons

This tool should only be used with products requiring a 14 mm / 0.55 in hole. Do not assume compatibility with an eyelet, rivet or accessory solely because the product is described as large size.

• Compatible eyelet applications: Can be used before eyelet installation when the selected eyelet requires a 14 mm / 0.55 in hole.
• Tarpaulin, awning and tent fittings: Suitable for cord, rope, tie-point and connection-hole preparation.
• Leather, bag and belt accessories: Can be used for strap points, cord openings, ring passages and accessory connections.
• Matching setting dies: A compatible setting die is required for final installation of eyelets, rivets or other accessories.
• Manual hand presses and machine systems: Can be used with compatible manual hand presses, impact presses, electric machines and pneumatic machines.

Usage Areas

• Tarpaulin, awning, tent and outdoor textile products
• Leather bags, large accessories, belts and covers
• Technical textile and heavy-duty fabric applications
• Cord, rope, lacing and strap passage points
• Large eyelet or accessory installation preparation
• Workshop, repair, sampling and small-batch production

Who Is It Suitable For?

This hole punching die is suitable for tarpaulin and awning workshops, tent manufacturers, leather workshops, bag makers, belt manufacturers, technical textile producers and professionals who need controlled large-hole preparation.

When Should You Choose It?

Choose this tool when a clean and repeatable 14 mm / 0.55 in hole is required. Correct hole diameter is especially important in large eyelet, rope, tarpaulin, awning and technical textile applications because it affects accessory fit and final installation stability.

Before Ordering

• This product is a hole punching die, not a setting die.
• Check whether the selected accessory requires a 14 mm / 0.55 in hole.
• Check eyelet inner diameter, barrel height, washer structure and material thickness together.
• Test on thick, coated or reinforced materials before production use.
• Check the press connection and tool size before ordering.
• Verify product code, package content and compatible add-ons on the live product page before publishing.

Frequently Asked Questions

What is this product used for?

It is used to prepare clean 14 mm / 0.55 in holes on tarpaulin, awning fabric, tents, leather, bags, belts and technical textiles.

Can this product set eyelets or rivets?

No. This product is only for hole preparation. A separate compatible setting die is required for final installation.

Can it be used with every 14 mm eyelet?

Not automatically. The eyelet barrel height, washer structure, material thickness and setting die must be checked before use.

Can it be used with a manual hand press?

Yes, when the tool connection and size compatibility are correct. It can also be used with compatible impact presses, electric machines and pneumatic machines.

Is it suitable for tarpaulin and awning fabric?

It can be used on suitable tarpaulin and awning materials. For thick, reinforced or coated surfaces, a test application is recommended before production.

What is included in the package?

The live product page should be checked before publishing. Hole punching die products may be sold with a lower anvil, but the exact package content must be confirmed from the actual product listing.

14 mm Hole Cutter: Brass Anvil Included

The 14 mm (0.55 in) punch includes a brass backing anvil. It is compatible with M0099 and M00100 presses. Check the fitting and the intended hardware dimensions before cutting.