Punch Set with 6 mm / 0.24 in, 7 mm / 0.28 in, 8 mm / 0.31 in, 9 mm / 0.35 in and 12 mm / 0.47 in Hole Punch Tips EDPCH0001

What Is a Hole Punch Set Used For?

A hole punch set is used for opening holes before setting snaps, eyelets, rivets, belts, bag accessories, shoe parts, fabric and leather components.

This product helps prepare the correct hole diameter before accessory installation. For eyelets, snaps and rivets to sit properly, the hole diameter should match the accessory body and application surface.

When Should This Set Be Selected?

This set should be selected when more than one hole size is needed. It includes 6 mm / 0.24 in, 7 mm / 0.28 in, 8 mm / 0.31 in, 9 mm / 0.35 in and 12 mm / 0.47 in punch tips.

It is suitable for snap, eyelet, rivet, belt, bag, shoe, textile accessory and hobby applications where the required hole diameter may change from one project to another.

5 Different Punch Sizes

The set includes five punch sizes: 6 mm / 0.24 in, 7 mm / 0.28 in, 8 mm / 0.31 in, 9 mm / 0.35 in and 12 mm / 0.47 in.

The correct hole size should be selected according to the snap, eyelet, rivet, buckle part or accessory body. A hole that is too small may prevent the part from passing through, while a hole that is too large may cause a loose fit.

Hole Preparation Before Snaps, Eyelets and Rivets

Hole preparation is important before installing snaps, eyelets and rivets. This punch set is used to open a suitable hole in fabric, leather or similar surfaces before the fastening step.

For eyelet applications, the hole diameter, eyelet inner diameter and setting die should be selected together. For snaps and rivets, post diameter, material thickness and application surface should be checked together.

Use for Belts, Bags and Shoes

This set can be used for belt holes, bag strap connection points, strap adjustment holes, shoe accessories, lace openings and leather-look textile products.

In bag and belt applications, hole alignment directly affects the finished appearance. The punching point should be marked before use, and punching should be done on a flat and suitable surface.

Use on Fabric and Leather Surfaces

This punch set can be used on fabric, canvas, faux leather, thin leather, felt, woven surfaces and similar textile materials. Material thickness and hardness can affect the punching result.

For thick or multi-layer materials, a sample test should be made before production. This helps confirm the selected punch size, material behavior and accessory fit.

Knurled Metal Handle

The set includes a knurled metal handle. This surface helps improve grip and provides better control during punching.

The interchangeable punch tips can be attached to the handle according to the required hole size.

Steel Punch Tips

The punch tips are made from steel. This supports durability in textile and accessory applications.

For longer service life, the tips should be used on suitable backing surfaces, unnecessary force on hard surfaces should be avoided, and the tips should be kept clean after use.

Product Clarification

This product is not a setting press, eyelet setting die or snap setting die. It is a hole punch set used before fastening.

After the hole is opened, the selected eyelet, snap or rivet should be installed with its own compatible setting die, hand press, hand tool or suitable fastening equipment.

Sales Content

This product should be considered as a punch set with 1 knurled metal handle and 5 interchangeable punch tips. The included sizes are 6 mm / 0.24 in, 7 mm / 0.28 in, 8 mm / 0.31 in, 9 mm / 0.35 in and 12 mm / 0.47 in.

Common Questions Before Ordering

Which sizes are included in this set?

The set includes 6 mm / 0.24 in, 7 mm / 0.28 in, 8 mm / 0.31 in, 9 mm / 0.35 in and 12 mm / 0.47 in punch tips.

What is this product used for?

It is used for opening holes before snap, eyelet, rivet, belt, bag, shoe, fabric and leather accessory applications.

Does it set eyelets?

This product does not set eyelets; it is used to open the hole before eyelet setting.

Can it be used for snaps?

Yes. It can be used to prepare the hole for snap fastener posts. A compatible snap setting die is still required for fastening.

Is it suitable for rivets?

Yes. It can be used for hole preparation before rivet installation.

Can it be used for belts?

Yes. It can be used for belt hole applications when the correct punch size is selected.

Can it be used for bags and shoes?

Yes. It can be used for bag strap connections, accessory openings, shoe lace holes and decorative accessory holes.

Can it be used on fabric and leather?

Yes. It can be used on fabric, canvas, faux leather, thin leather, felt and similar surfaces.

Are the tips interchangeable?

Yes. The 6 mm / 0.24 in, 7 mm / 0.28 in, 8 mm / 0.31 in, 9 mm / 0.35 in and 12 mm / 0.47 in tips can be attached according to the required hole size.

Is a press machine included?

No. This product is a hole punch set; it is not a press machine or fastening die.