Professional Manual Hand Press, Punch and Setting Die Set for 6–6.5 mm / 0.236–0.256 in Pleated Screen Eyelets KLP00040SinSETMPrf

Professional Hand Press and Die Set for Pleated Screen Eyelets

This professional set combines the press and two product-specific dies required to prepare PVC strips and install compatible metal eyelets in pleated insect screen and pleated blind systems.

The punch die prepares a 6 mm / 0.236 in round opening. The setting die closes the compatible standard-barrel eyelet over the selected washer. The manual hand press operates the relevant die for each process.

Professional Set Contents

• Hardened, heat-treated punch die preparing a 6 mm / 0.236 in PVC-strip opening
• Hardened, heat-treated setting die for compatible 6–6.5 mm / 0.236–0.256 in eyelets
• Manual hand press

Difference from the Professional Die-Only Set

The professional die-only set contains the hardened punch and setting dies. This machine-assisted professional version also includes the manual hand press required to operate the two dies.

Functions of the Included Equipment

Punch die: Prepares a 6 mm / 0.236 in round opening in the PVC strip. It does not install the eyelet.

Setting die: Forms the compatible eyelet barrel over the selected washer. It does not punch the PVC strip.

Manual hand press: Operates the punch or setting die through manual lever action.

Technical Information

Eyelet Class and Punched Hole Size

The 6–6.5 mm / 0.236–0.256 in value identifies the target eyelet-opening class. The punch die prepares a 6 mm / 0.236 in opening for the eyelet barrel.

These measurements describe different parts of the application and must not be treated as the same dimension.

Compatibility Limits

Eyelets carrying the same nominal measurement may have different outer diameters, barrel heights, face profiles and washer constructions.

The actual eyelet and washer geometry must match the setting die. Different barrel structures must not automatically be treated as interchangeable.

Frequently Asked Questions