Hole Punching Die 15 mm / 0.59 in PDV000150DEL

15 mm / 0.59 in Hole Punching Die for Large Hole Preparation

This 15 mm / 0.59 in hole punching die is designed for preparing clean and controlled large holes on tarpaulin, awning fabric, tents, leather, bags, belts and technical textiles. It can be used where a large opening is required before fitting a compatible eyelet, rope, cord, lacing system or accessory.

This tool prepares the hole only. It does not set eyelets, rivets or other accessories. Once the hole is prepared, use a separate compatible setting die matched to the selected accessory and material thickness.

When Should You Use a 15 mm / 0.59 in Hole Punching Die?

• Tarpaulin, awning and tent tie points
• Large eyelet preparation
• Rope, cord and lacing passages
• Leather bag, belt and cover applications
• Technical textile and heavy-duty fabric work
• Large accessory and strap connection points

Punching Die vs. Setting Die

A hole punching die prepares the opening in the material. A setting die installs the eyelet, rivet or accessory after the hole is prepared. These are separate tools with separate functions.

Do not select a setting die only by hole diameter. For eyelet applications, check the inner diameter, barrel height, washer structure, material thickness and eyelet system before ordering.

Compatible Applications and Add-ons

This tool should only be used where a 15 mm / 0.59 in hole is required. Measure the selected accessory before treating it as compatible.

• Compatible eyelet applications requiring a 15 mm / 0.59 in hole
• Tarpaulin, awning and tent fittings
• Rope, cord, lacing and strap passage points
• Leather bag and belt accessory connections
• Matching eyelet or accessory setting dies
• Compatible manual hand presses and machine systems

For similar tools, see Hole Cutter Tools and Punching Dies. Select the final setting die according to the actual eyelet, rivet or accessory system rather than by hole size alone.

Application Order

1. Mark the intended accessory position on the material.
2. Prepare the 15 mm / 0.59 in hole with the punching die.
3. Place the compatible accessory into the prepared opening.
4. Install the accessory with its matching setting die.
5. Check that the finished accessory is seated evenly and securely.

Before Ordering

• This is a hole punching die, not a setting die.
• Check whether the selected accessory truly requires a 15 mm / 0.59 in hole.
• Check accessory dimensions, material thickness and washer structure together.
• Test on thick, reinforced, coated or rigid surfaces before production use.
• Check the tool connection and press connection before ordering.
• Verify material, package content, lower anvil availability and compatible add-ons on the live product page.

Frequently Asked Questions

What is this product used for?

It is used to prepare 15 mm / 0.59 in holes on tarpaulin, awning fabric, tents, leather, bags, belts and technical textiles.

Can this product set eyelets or rivets?

No. It prepares the hole only. A separate compatible setting die is required for final installation.

Can it be used with every 15 mm eyelet?

Not automatically. Eyelet dimensions, barrel height, washer structure, material thickness and the matching setting die must be checked first.

Can it be used with a manual hand press?

Yes, when the tool connection and press connection are compatible. It may also be used with compatible impact presses, electric machines and pneumatic machines.

Is it suitable for tarpaulin and awning fabric?

It can be used on suitable tarpaulin and awning materials. Test first on thick, reinforced or coated surfaces.

What is included in the package?

The exact package content should be verified on the live product page before publication.