50 m / 164.04 ft N5 / #5 Nylon Zipper Tape Set with 25 Single-Pull Sliders for Workshops SET-T10T-NAYLON-50M25C

This 50 m / 164.04 ft N5 / #5 nylon zipper tape set with 25 single-pull sliders is a practical workshop supply for makers who need custom zipper lengths without relying on many fixed-size zippers. It can be used for bags, pouches, organizers, equipment cases, textile covers, travel accessories, repair work, samples, and small-to-medium production runs.

Continuous zipper tape allows the zipper length to follow the actual product design. A compact organizer pocket may need a short zipper closure, while a case, bag opening, or protective cover may require a longer zipper line. With one consistent zipper system, workshops can prepare several lengths from the same supply and keep their production workflow more organized.

A useful zipper-tape quantity for regular workshop production

A 50 m / 164.04 ft zipper-tape supply gives a workshop more room to work than a small sample set while avoiding the larger inventory commitment of a high-volume production roll. It can be useful for limited collections, custom bag orders, regular repairs, product development, sewing studios, and small brands building multiple product sizes.

The 25 included sliders support a range of single-zipper and multiple-zipper projects. Plan your production around both the tape length and the number of sliders. A bag with an outer opening, an inner pocket, and a separate accessory compartment may use more than one slider, even when the total zipper tape requirement remains moderate.

Use single-pull sliders for one-sided zipper access

The included sliders are single-pull sliders, meaning the zipper is normally operated from one accessible side. This is suitable for bag tops, pouch openings, organizer compartments, equipment cases, luggage sections, textile covers, and similar products where a second pull tab is not needed.

For products that must be opened from both sides, such as sleeping bags, selected tent panels, reversible covers, or technical enclosures, a double-pull slider can be more appropriate. Slider selection should follow the final use of the product, not only the zipper size.

Measure the real zipper opening before cutting

Measure the actual zipper path from the start point to the end point before cutting. Include seam allowance, lining depth, corner transitions, zipper-end finishing, binding, piping, and the amount of opening required for comfortable use.

Do not use the total length of a bag or case as the zipper measurement. A zipper cut too short can limit access to the product. A zipper cut too long can create extra tape, rippling, bulky corners, and uneven seams. A correct measurement helps the finished zipper line look cleaner and feel smoother in daily use.

Test your materials before preparing multiple closures

Before cutting a large number of pieces, make one sewn sample using the real outer fabric, lining, foam, interfacing, webbing, binding, and seam allowance from your project. Check zipper travel, slider movement, coil alignment, access width, and whether fabric layers interfere with the zipper path.

This step is particularly important for thick canvas, padded covers, foam-backed cases, multi-layer bags, and technical textile products. Zipper tape may move freely before sewing but become tighter after the surrounding material is attached. Testing first helps reduce material loss and avoids unnecessary rework.

Finish each cut zipper end securely

Continuous zipper tape does not have factory-finished ends after cutting. Secure both ends with a suitable zipper stop, sewn end, folded construction, or another product-specific finishing method. This prevents the slider from running off the tape during regular use.

Zipper stops, thread, machines, cutting tools, and additional accessories are not included in this set. Plan the end-finish method before preparing multiple production pieces, especially for bags and cases that will be opened repeatedly or carry heavier contents.

Standard nylon coil zipper tape, not TPU-coated tape

This is a standard N5 / #5 nylon coil zipper-tape set. It is not TPU-coated water-resistant zipper tape. For outdoor covers, rain-facing textile products, moisture-exposed bags, or projects requiring a more protected zipper surface, compare TPU-coated zipper tape before selecting the final zipper system.

A more water-resistant zipper surface does not make the full product waterproof on its own. Fabric coating, seam construction, seam sealing, flap design, lining, zipper-end finishing, and total product assembly all affect the final level of moisture protection.

Custom zipper tape and branded slider options

For larger production requirements, custom tape colors, single-pull or double-pull slider configurations, branded pull tabs, logo applications, special finishes, and product-specific zipper systems can be reviewed. Share the intended product type, target zipper-length range, preferred tape color, slider requirement, estimated quantity, and any physical sample or technical reference.

Frequently Asked Questions

What does the set include?

The set includes 50 m / 164.04 ft of N5 / #5 nylon zipper tape and 25 single-pull sliders.

Is this a set of ready-made zippers?

No. It is continuous zipper tape that can be cut to the required length for each project.

Are the included sliders single-pull sliders?

Yes. The set includes 25 single-pull sliders for standard one-sided zipper operation.

Are zipper stops included?

No. Stops, thread, cutting tools, sewing equipment, and extra hardware are not included.

Can this set be used for bags, cases, and organizers?

Yes. It is suitable for bags, pouches, cases, organizers, covers, repairs, and many custom textile closures.

Is this TPU-coated water-resistant zipper tape?

No. This is standard nylon coil zipper tape. Use a TPU-coated alternative when a more water-resistant zipper surface is required.