7.3 mm / 0.29 in Sheet Steel Eyelet – 250 Pieces K0001

7.3 mm / 0.29 in sheet steel eyelet technical and installation guide

7.3 mm / 0.29 in Sheet Steel Eyelet – 250 Pieces K0001 is designed for bags, footwear, belts, leather goods and outerwear where a clean reinforced opening and repeatable installation are required. The 250-piece pack supports samples, workshops and regular production.

Technical specifications

• Inner diameter: 7.3 mm / 0.29 in
• Outer diameter: 15 mm
• Tube height: 6 mm
• Material: Sheet steel
• Pack: 250 pieces
• Applications: bags, footwear, belts, leather goods and outerwear

Choosing the correct size

Consider the real inner opening, material thickness, preparation hole and the component passing through the eyelet. Oversized holes can create movement; undersized holes can stress the surrounding material.

Matching setting die

Use the matching No. 5 eyelet setting die to keep the eyelet centered and consistently formed.

Matching punching die

Prepare a clean opening with the matching eyelet punching die. Hole quality directly affects installation quality.

Press selection

For repeated production, the M0099 hand press provides controlled pressure and consistent operation when used with the matching die.

Installation sequence

1. Mark the position.
2. Check material thickness.
3. Punch the opening.
4. Position the eyelet.
5. Install the matching die.
6. Center the components and apply controlled pressure.
7. Inspect the finished assembly.

Production notes

• Test on scrap material before full production.
• Do not use a mismatched die.
• Recheck press pressure when material thickness changes.
• Remove burrs and damaged cut edges before setting.
• Use the same production batch when visual consistency matters.
• Inspect the finished eyelet for movement and deformation.

Workshop and production use

The 250-piece pack supports stock planning for frequently used sizes. Keeping the punching die, setting die and press within the same size family reduces setup errors and improves repeatability.

Related equipment

The most relevant complements are the matching No. 5 setting die, matching punching die and, depending on volume, the M0099 hand press.

FAQ

How many eyelets are in one pack?

One pack contains 250 eyelets.

Which setting die should I use?

Use the matching die for the No. 5 size family.

Is a punching die recommended?

Yes. A matching punching die helps create a clean, correctly sized opening.

Can it be used with a hand press?

Yes. It can be installed on the M0099 with the matching setting die.

Is this stainless steel?

No. It belongs to the sheet-steel eyelet family.