Size 24 Aluminum Eyelet Hand Punch and Setting Tool 9 mm (0.35 in) AL24TDE

Manual Punching and Setting Tool for Size 24 Aluminum Eyelets

This Size 24 aluminum eyelet hand tool is designed to assist with the manual installation of the matching eyelet on tarps, tents, awnings, banners, fabrics and other suitable textile surfaces.

The tool has two working orientations. The conical end helps prepare the opening for the eyelet barrel, while the raised end helps shape and close the barrel over the matching metal washer with controlled hammer strikes.

Its compact, hand-operated construction makes it practical when a manual press is unavailable, when the workpiece cannot be positioned beneath a machine or when only a small number of eyelets must be installed.

When Should This Tool Be Selected?

• When installing the specified Size 24 aluminum eyelet
• When a hand press or fixed setting machine is unavailable
• For on-site tarp, tent or awning repairs
• When the work area cannot be positioned beneath a press
• For sampling or low-volume eyelet installation
• When a compact and portable hand tool is required

Compatible Eyelet and Washer Measurements

Two Working Orientations

Conical end for preparing the hole

The conical working end helps prepare the opening through which the eyelet barrel will pass. The material should be placed on a flat, solid and impact-resistant support before punching.

Raised end for setting the eyelet

After positioning the eyelet and matching washer, turn the tool to the setting orientation. Place the raised end vertically over the eyelet barrel and use controlled hammer strikes to help flare the barrel over the washer.

The tool therefore performs the punching operation in one orientation and the setting operation after it has been turned over.

Installation Steps

1. Mark the position where the eyelet will be installed.
2. Place the material on a flat and impact-resistant work surface.
3. Position the conical end vertically over the marked point.
4. Use controlled hammer strikes to prepare the required opening.
5. Insert the matching Size 24 aluminum eyelet through the opening.
6. Place the matching metal washer over the eyelet barrel.
7. Turn the tool to the setting orientation.
8. Position the raised end centrally over the eyelet barrel.
9. Apply light and even hammer strikes while keeping the tool vertical.
10. Check that the barrel has flared evenly over the washer.

Why Should Hammer Force Be Controlled?

One excessive hammer strike may bend the eyelet, tear the aluminum barrel, close the washer unevenly or damage the application surface.

Several light and controlled strikes allow the barrel to open gradually and make it easier to inspect the installation while working.

How Is It Different from a Press-Mounted Die?

This product is not a threaded upper and lower die set designed for installation in a manual or powered press. It is a portable hand-held tool that is struck directly with a hammer.

It is practical for household repairs, fieldwork, samples and low-volume installation. A compatible press-mounted eyelet die may provide more consistent and repeatable results for continuous or high-volume production.

Typical Applications

• Tarpaulin edging and repairs
• Tent fastening and cord openings
• Awning and shade applications
• Banner and vinyl hanging points
• Protective covers and textile cases
• Camping and outdoor textile products
• Bags and carrying products
• Heavy fabrics and technical textiles
• Home, workshop and field repairs

Checks Before Installation

• Confirm that the eyelet is the linked Size 24 aluminum model.
• Make sure the eyelet and washer belong to the same product system.
• Check the thickness and number of material layers.
• Do not confuse the punching end with the setting end.
• Keep the tool perpendicular to the material and eyelet.
• Test the application on a spare piece of the same material first.

Safety Instructions

• Keep your holding hand away from the hammer impact area.
• Use suitable eye and hand protection.
• Do not strike the tool while it is leaning to one side.
• Use several controlled strikes instead of one excessive blow.
• Do not work directly on glass, tiles or brittle surfaces.
• Keep the tool out of the reach of children.

Package Contents

• 1 Size 24 aluminum eyelet hand punching and setting tool

Aluminum eyelets, metal washers, hammer, hand press and other application equipment are not included.

Compatible Products and Related Categories

• Size 24 aluminum eyelet in the 9 mm inner-diameter group
• Aluminum eyelet models
• Eyelet setting dies and hand tools
• Eyelet hole-punching dies
• Manual hand press for repeated applications

The compatible aluminum eyelets and metal washers are sold separately. Add the matching eyelet product separately when a complete application combination is required.

Frequently Asked Questions

Content last updated: July 23, 2026 — E-Düğme