Oval Eyelet Punching Die 10 mm / 0.39 in KLPK0010OVLDELNO2

10 mm / 0.39 in Oval Eyelet Punching Die for Clean Hole Preparation

This 10 mm / 0.39 in oval eyelet punching die is designed to prepare a clean and controlled oval hole before oval eyelet installation. A correctly prepared oval hole helps the eyelet sit better on the material and supports a neater, more stable final result.

This product is a punching die, not an oval eyelet setting die. First, the hole is prepared with this punching die. Then the compatible oval eyelet is installed with the matching setting die.

Compatible Products and Recommended Add-ons

The “You May Also Need” section on the product page includes the main complementary products for this item:

• Manual Hand Press M0099: Can be used to operate the punching die more easily and consistently in workshop applications.
• 10 mm / 0.39 in Oval Brass Eyelets EROV0010PR: Compatible oval eyelets that can be used after the hole is prepared with this punching die.
• 10 mm / 0.39 in Oval Eyelet Setting Die KLPK0010OVLNO2: Required for setting the oval eyelet after the hole has been prepared.

Application Order

1. Mark the eyelet position on the material.
2. Prepare the oval hole with this 10 mm / 0.39 in oval eyelet punching die.
3. Place the compatible oval eyelet into the prepared hole.
4. Install the eyelet using the matching 10 mm / 0.39 in oval eyelet setting die.
5. Check that the eyelet is fully seated on the material.

General Information and Compatibility Note

This product can be used with hand striking tools, manual hand presses, impact presses, electric machines and pneumatic machines available on our website. Before use, tool connection, machine connection, product size and system compatibility must be checked.

Hand tools, manual presses or other machines are not included in the standard package and should be selected separately if required.

Usage Areas

• Hole preparation before 10 mm / 0.39 in oval eyelet installation
• Leather bags, wallets, belts and accessory products
• Tarpaulin, awning, tent and outdoor textile applications
• Textile, cardboard, labels and packaging applications
• Shoe, decorative accessory and craft projects

Before Ordering

• This product is an oval eyelet punching die, not a setting die.
• Use a compatible 10 mm / 0.39 in oval eyelet with this product.
• A matching oval eyelet setting die is required for final installation.
• Manual hand press M0099 can be used as a compatible application tool.
• Check material thickness, eyelet model, washer compatibility and machine connection before use.

Frequently Asked Questions

Can this product set the oval eyelet?

No. This product is only used for oval hole preparation. A compatible oval eyelet setting die is required for installation.

Which oval eyelet can I use with this product?

It can be used with compatible 10 mm / 0.39 in oval eyelets. The product page recommends the matching oval brass eyelet group as a complementary item.

Which setting die should be used after punching the hole?

After the hole is prepared, the matching 10 mm / 0.39 in oval eyelet setting die should be used for installation.

Can I use this product with a manual hand press?

Yes. It can be used with a compatible manual hand press such as M0099 when the tool connection and size compatibility are correct.

What is included in the package?

The package includes 1 upper punching die and 1 lower anvil.

Which materials can it be used on?

It can be used on suitable textile, leather, tarpaulin, bags, cardboard and accessory materials. A test application is recommended for thick, hard or coated surfaces.