Pleated Screen Trial Set with 250 Eyelets, Manual Hand Press, Punch and Setting Dies for 5–5.5 mm / 0.197–0.217 in Eyelets Set00030SinDN

What Is the Pleated Screen Eyelet Trial Set?

This trial set brings together the equipment and consumable components required to prepare PVC strips and install compatible metal eyelets in pleated insect screen and pleated blind systems.

The punch die prepares a 5 mm / 0.197 in round opening. The setting die closes the eyelet over the selected plastic or metal washer. The manual hand press operates the two dies separately.

The set also includes 250 metal eyelets, allowing sample applications to be prepared without purchasing a separate eyelet package.

Set Contents

• Manual hand press
• Punch die preparing a 5 mm / 0.197 in PVC-strip opening
• Setting die for compatible 5–5.5 mm / 0.197–0.217 in eyelets
• 250 metal pleated screen eyelets
• Plastic washers
• Metal washers

The separate quantities of the plastic and metal washers are not specified. Both washer types are included.

How Does It Differ from the Other Sets?

The die-only set contains the punch and setting dies. The manual-press set adds the hand press.

This trial version includes the press and both dies together with 250 metal eyelets and both washer types. It combines the application equipment and trial consumables in one set.

Functions of the Included Components

Punch die: Prepares the 5 mm / 0.197 in round opening required for the eyelet barrel.

Setting die: Closes the compatible eyelet over the selected plastic or metal washer.

Manual hand press: Operates the punch and setting dies through manual lever action.

Eyelets and washers: Allow sample installations to be prepared with either washer type included in the set.

Technical Information

Eyelet Class and Prepared Hole Size

The 5–5.5 mm / 0.197–0.217 in value identifies the target eyelet class. The punch die prepares a 5 mm / 0.197 in round opening in the PVC strip.

The included eyelet has an actual inner diameter of approximately 5.3 mm / 0.209 in. The eyelet measurement and punched-hole diameter are separate technical values.

Replacement Eyelet Compatibility

Replacement eyelets must not be selected from the nominal size alone. Their outer diameter, height, face profile and washer construction must match the setting die.

Extra-long-barrel or differently shaped eyelets must not automatically be treated as interchangeable.

Frequently Asked Questions