9.5 mm / 0.37 in Double Cap Rivet Setting Die KLP0095CFT

What Is a Double Cap Rivet Setting Die?

This Double Cap Rivet Setting Die is used to apply compatible 9.5 mm / 0.37 in double cap rivets with controlled pressure. Double cap rivets provide a finished cap appearance on both sides of the assembled material, making them suitable for visible fastening points in leather goods, bags, belts, wallets and textile accessories.

This tool does not manufacture rivets and does not punch the material. It is used for the setting stage after the correct rivet, post length and material preparation have been selected.

What Is a Double Cap Rivet?

A double cap rivet is a fastening system with a decorative cap finish visible from both sides. Unlike a single cap rivet, it is selected where the reverse side is also visible and a cleaner, more finished appearance is wanted.

It can be useful for bags, belts, wallet flaps, leather straps, garment details, organisers and decorative connection points where the fastening is part of the product design.

Why Post Length Matters

Rivet cap diameter is only one part of selection. The post length must match the combined thickness of the materials being joined.

• Post too short: The components may not close securely.
• Post too long: The rivet can feel loose, buckle or close unevenly.
• Correct post length: Helps produce a balanced closure and cleaner visible finish.

Does This Tool Punch a Hole?

No. This is a Rivet Setting Die, not a Punching Die. Prepare the correct hole for the rivet post before installation. The hole size should be selected according to the actual post diameter and the material structure.

A hole that is too tight can stress the material or prevent clean assembly. A hole that is too loose can weaken the connection. Test the actual rivet and material before repeat production.

Suitable Applications

• Leather bags and bag-handle connections
• Belts, straps and webbing assemblies
• Wallets, card holders and small leather goods
• Garment, denim and workwear details
• Footwear and fashion accessories
• Textile covers, organisers and decorative fastening points
• Small-batch and workshop production

Press Compatibility

Use this die with a hand tool, manual press, impact press or suitable installation machine only after confirming the physical die holder, alignment and press connection.

The actual rivet, setting die and press should be checked as one working system. Similar-looking dies or nominally similar rivet sizes should not be treated as automatically interchangeable.

Correct Application Sequence

1. Select the compatible double cap rivet.
2. Confirm the cap profile, post length and total material thickness.
3. Prepare the appropriate hole for the rivet post.
4. Position the lower cap and post through the material.
5. Place the upper cap correctly onto the post.
6. Position the rivet in the setting die in the correct orientation.
7. Apply controlled pressure.
8. Check closure tightness, cap alignment and surface condition.

Frequently Asked Questions

What type of rivet is this die for?

It is intended for compatible 9.5 mm / 0.37 in double cap rivet systems. Final compatibility must be confirmed with the actual cap and post geometry.

Can it be used for single cap rivets?

Not automatically. Single cap and double cap rivets can have different cap forms and closing structures. Use a die matched to the actual rivet system.

Does this tool punch the material?

No. It is a Rivet Setting Die. Prepare the hole separately before setting the rivet.

How do I choose the correct post length?

Choose it according to the combined thickness of the materials being joined. Sample testing is recommended before production.

Can it be used with a manual press?

Yes, when the die holder and press connection are physically compatible.

What should be checked before production?

Test the real rivet, cap form, post length, prepared hole, material thickness and press pressure together.