8 mm / 0.31 in Zamak Bra Strap Slider PIR710008Z

8 mm / 0.31 in Zamak Bra Strap Slider is a conventional Zamak slider for adjustable narrow straps.

Product function

This standard slider adjusts usable strap length. It supports adjustable straps on bras, bralettes, swimwear and bikinis. Because the tape follows a defined route through the frame, size and tape construction should be evaluated together.

For production, This standard slider adjusts usable strap length. It supports adjustable straps on bras, bralettes, swimwear and bikinis. Because the tape follows a defined route through the frame, size and tape construction should be evaluated together.

8 mm / 0.31 in size family

The nominal size identifies the hardware family. Actual tape thickness, finished width, elasticity and edge construction can vary, so physical fit should not be assumed from the size label alone. Sample-test the real production tape.

For production, The nominal size identifies the hardware family. Actual tape thickness, finished width, elasticity and edge construction can vary, so physical fit should not be assumed from the size label alone. Sample-test the real production tape.

Zamak material

The product is classified as Zamak. Keeping material, size and component type separate improves category filtering. No unverified plating, corrosion-resistance, wash-performance or chemical-durability claims are added.

For production, The product is classified as Zamak. Keeping material, size and component type separate improves category filtering. No unverified plating, corrosion-resistance, wash-performance or chemical-durability claims are added.

Standard versus double-loop slider

This product uses a conventional slider frame. The live 8 mm / 0.31 in double-loop slider uses two connected loops and a different routing geometry. The two models can perform a similar adjustment function but do not have the same strap path or finished appearance.

For production, This product uses a conventional slider frame. The live 8 mm / 0.31 in double-loop slider uses two connected loops and a different routing geometry. The two models can perform a similar adjustment function but do not have the same strap path or finished appearance.

Applications

The slider can be considered for bras, bralettes, bikinis, swimwear, bodysuits, nightwear and similar narrow-strap garments. A fixed strap may not need a slider. Position should be established on the approved sample.

For production, The slider can be considered for bras, bralettes, bikinis, swimwear, bodysuits, nightwear and similar narrow-strap garments. A fixed strap may not need a slider. Position should be established on the approved sample.

Difference from ring and hook

The slider adjusts strap length. The live 8 mm / 0.31 in ring creates a connection or direction-change point. The live 8 mm / 0.31 in hook completes a connection. Sharing the same size family does not make them interchangeable.

For production, The slider adjusts strap length. The live 8 mm / 0.31 in ring creates a connection or direction-change point. The live 8 mm / 0.31 in hook completes a connection. Sharing the same size family does not make them interchangeable.

Single component or set

This listing is for one slider. If a ring is also required, the live 8 mm / 0.31 in 2-piece set can be considered. If a hook is also part of the bill of materials, the live 8 mm / 0.31 in 3-piece set may be appropriate.

For production, This listing is for one slider. If a ring is also required, the live 8 mm / 0.31 in 2-piece set can be considered. If a hook is also part of the bill of materials, the live 8 mm / 0.31 in 3-piece set may be appropriate.

Live category

Use the live Bra Rings, Hooks and Strap Adjustment Buckles category as the main family reference. Product type, size and material should be evaluated together.

For production, Use the live Bra Rings, Hooks and Strap Adjustment Buckles category as the main family reference. Product type, size and material should be evaluated together.

Sample testing

Route the actual production tape through the slider and move the adjustment several times. Check for binding, excess play, folding or unexpected movement. Test both relaxed and tensioned positions and review the slider at the angle used on the finished garment.

For production, Route the actual production tape through the slider and move the adjustment several times. Check for binding, excess play, folding or unexpected movement. Test both relaxed and tensioned positions and review the slider at the angle used on the finished garment.

Technical sheet

Record model PIR710008Z, component type Bra Strap Slider, 8 mm / 0.31 in size, Zamak material and package content. Recording the strap-tape reference on the same sheet makes the approved combination easier to reproduce.

For production, Record model PIR710008Z, component type Bra Strap Slider, 8 mm / 0.31 in size, Zamak material and package content. Recording the strap-tape reference on the same sheet makes the approved combination easier to reproduce.

Bulk production

Compare initial completed straps with the approved sample. If adjustment behavior changes, review tape lot, routing direction and stitching together.

For production, Compare initial completed straps with the approved sample. If adjustment behavior changes, review tape lot, routing direction and stitching together.

Package content and minimum order

One sales unit contains one bra strap slider. The minimum order is 500 pieces. Package content and minimum order quantity are different concepts, and production demand should be calculated from the number of sliders used per finished garment.

For production, One sales unit contains one bra strap slider. The minimum order is 500 pieces. Package content and minimum order quantity are different concepts, and production demand should be calculated from the number of sliders used per finished garment.

Purchasing checks

Before ordering, verify model PIR710008Z, component type, size, Zamak material, package content and minimum order quantity. Do not confuse the standard and double-loop models.

For production, Before ordering, verify model PIR710008Z, component type, size, Zamak material, package content and minimum order quantity. Do not confuse the standard and double-loop models.

Warehouse management

Standard sliders, double-loop sliders, rings, hooks and sets should remain under separate model codes. Shelf labels should show both model code and component type to reduce picking errors.

For production, Standard sliders, double-loop sliders, rings, hooks and sets should remain under separate model codes. Shelf labels should show both model code and component type to reduce picking errors.

Signs of a mismatch

If the tape binds, bunches, moves unexpectedly or makes the slider look out of proportion, review the tape-hardware relationship. Tape thickness or stitching can also be responsible.

For production, If the tape binds, bunches, moves unexpectedly or makes the slider look out of proportion, review the tape-hardware relationship. Tape thickness or stitching can also be responsible.

Quality control

Check slider form, tape movement and stitch position against the approved sample. The goal is repeatable behavior throughout the production run.

For production, Check slider form, tape movement and stitch position against the approved sample. The goal is repeatable behavior throughout the production run.

Repeat orders

Use model PIR710008Z together with component type, size and Zamak material rather than a generic phrase such as 8 mm slider. This reduces confusion with similar products.

For production, Use model PIR710008Z together with component type, size and Zamak material rather than a generic phrase such as 8 mm slider. This reduces confusion with similar products.

Care approach

No verified special coating endurance or chemical-care specification is provided, so those claims are not added. Final garment care should consider the complete material system.

For production, No verified special coating endurance or chemical-care specification is provided, so those claims are not added. Final garment care should consider the complete material system.

Final verification

Before a large order, compare the approved sample with the current production tape. If tape lot, thickness or elasticity has changed, previous approval should not automatically be treated as valid.

For production, Before a large order, compare the approved sample with the current production tape. If tape lot, thickness or elasticity has changed, previous approval should not automatically be treated as valid.

Frequently Asked Questions

What is the size?

8 mm / 0.31 in.

What is the material?

Zamak.

What is included?

1 slider.

What is the minimum order?

500 pieces.

Is it the same as the double-loop model?

No.

Is sample testing needed?

Yes.

Additional production verification

Test the standard slider again with the current production tape. If tape lot or stitching method has changed, previous approval should not automatically be considered valid. A short verification sample confirms routing, nominal size and adjustment behavior before larger quantities are assembled.

Additional production verification

Additional production verification

Additional production verification

Additional production verification

Additional production verification

Additional production verification

Additional production verification

Additional production verification

Routing the strap through the slider

The way the actual production tape moves through the slider depends on more than the nominal 8 mm / 0.31 in width. Approval should be based on the completed strap rather than the metal part alone. On e-Düğme, component type, the 8 mm / 0.31 in family and Zamak material should be reviewed together. If adjustment binds or moves too freely, compare tape thickness, fold construction, stitch position and assembly direction before replacing the hardware. A short verification sample before a large run supports repeatable production and repeat orders with the same approved component.

Checking adjustment range on the sample

Because the slider changes usable strap length, the sample should confirm both adjustment range and controlled tape movement. Recording routing direction, stitch distance and model identification helps production reproduce the approved adjustment behavior. On e-Düğme, component type, the 8 mm / 0.31 in family and Zamak material should be reviewed together. If adjustment binds or moves too freely, compare tape thickness, fold construction, stitch position and assembly direction before replacing the hardware. A short verification sample before a large run supports repeatable production and repeat orders with the same approved component.

Standard versus double-loop model

The conventional PIR710008Z frame and the double-loop model belong to the same function group but use different routing geometry. Standard and double-loop sliders should remain under separate model codes instead of being selected by visual similarity. On e-Düğme, component type, the 8 mm / 0.31 in family and Zamak material should be reviewed together. If adjustment binds or moves too freely, compare tape thickness, fold construction, stitch position and assembly direction before replacing the hardware. A short verification sample before a large run supports repeatable production and repeat orders with the same approved component.

Fold allowance and stitch distance

Folded and stitched tape can create additional thickness close to the slider. Single-slider, 2-piece and 3-piece buying formats should follow actual component consumption in the bill of materials. On e-Düğme, component type, the 8 mm / 0.31 in family and Zamak material should be reviewed together. If adjustment binds or moves too freely, compare tape thickness, fold construction, stitch position and assembly direction before replacing the hardware. A short verification sample before a large run supports repeatable production and repeat orders with the same approved component.