11 mm / 0.43 in Zamak Bra Strap Slider, Ring and Hook 3-Piece Set PIR770011Z

11 mm / 0.43 in Zamak Bra Strap Slider, Ring and Hook 3-Piece Set combines three core metal components used in adjustable lingerie and swimwear straps. Each set contains one slider, one ring and one hook. The slider adjusts strap length, the ring creates a connection or direction-change point, and the hook completes the intended attachment.

Role of the 3-piece set

For garments that use all three components, grouping them in one set can simplify purchasing, picking and inventory control. The set should still follow the approved garment construction rather than being treated as mandatory for every strap design.

Package content and quantity planning

One catalog unit represents three physical pieces. An order of 500 sets therefore represents 500 sliders, 500 rings and 500 hooks. Production planning should distinguish set quantity from physical component quantity.

11 mm / 0.43 in size family

The three parts share the same nominal hardware family. Actual fit still depends on strap thickness, elasticity, fold geometry and the hook connection. The complete strap system should be tested on a sample.

Zamak material

All three components are classified as Zamak. Material, size and product type are maintained separately for accurate filtering. No unverified plating, corrosion-resistance or wash-performance claims are added.

Applications

The set can be considered for bras, bralettes, bikinis, swimwear, bodysuits and similar adjustable strap garments that also use a hook connection. If a hook is not required, a 2-piece slider-and-ring set may be more appropriate.

2-piece versus 3-piece set

The 2-piece set contains the slider and ring. The 3-piece set adds the hook. Selection should follow the real strap construction rather than simply choosing the set with more components.

Live category and alternatives

Browse the live Bra Rings, Hooks and Strap Adjustment Buckles category for broader comparison. The live 8 mm / 0.31 in Zamak 3-piece set provides a direct size comparison.

For a different construction in the same nominal size class, review the live 11 mm / 0.43 in metal/nylon-coated 3-piece set. It is not the same material and should not be treated as an automatic substitute.

Sample checks

First check how the strap moves through the slider. Then review ring angle and folded strap thickness. Finally confirm that the hook engages the intended counterpart correctly. Bulk production should begin only after the complete assembly is approved.

Quality-control checklist

• Confirm all three components are present.
• Verify each belongs to the 11 mm / 0.43 in family.
• Test the actual strap through the complete hardware path.
• Check each component for visible deformation.
• Confirm Zamak in purchasing records.

Signs of a mismatch

Binding at the slider, excessive play at the ring, poor hook engagement or an unstable connection angle indicate that the system should be reviewed.

Purchasing and inventory planning

The minimum order is 500 sets. Because every set contains three physical pieces, warehouse planning should account for the total component count.

Moving from 8 mm / 0.31 in to 11 mm / 0.43 in

A wider strap can change fold allowances, stitching positions and visual scale. A production specification approved for the narrower size should be rechecked.

Frequently Asked Questions

What is included?

One slider, one ring and one hook.

What does 11 mm / 0.43 in mean?

It identifies the common hardware size family.

What is the material?

Zamak.

What is the minimum order?

500 sets.

How is it different from the 2-piece set?

It also includes the hook.

A practical method for selecting strap hardware

The safest way to select lingerie and swimwear hardware is to evaluate the component as part of the real production system rather than by catalog name alone. Size, material and component type should be read together. The 11 mm / 0.43 in value defines the nominal size family, Zamak defines the material classification, and the product type explains the function within the strap path.

Using the model code on purchasing and production documents also improves continuity. Once a sample is approved, keeping the exact model code on the bill of materials reduces the risk of replacing the component with a visually similar but functionally different item.

Evaluating the strap tape and hardware together

Strap width is only one variable. Thickness, elasticity, weave density and edge firmness can all change the way a tape interacts with metal hardware. A soft elastic may compress easily through a component, while a denser tape with the same nominal width may require more clearance. The real production tape should therefore be part of the approval process.

Sample testing should also include the strap under realistic tension. The angle of hardware can change when a bra or swimsuit is worn, and nearby stitching or folded tape sections can influence the final position.

Approving size during product development

For a new garment, the strap tape and hardware should be developed as one system. If an existing collection changes strap width, previously approved hardware should not automatically be reused. Moving from 8 mm / 0.31 in to 11 mm / 0.43 in requires a review of every connected component and the relevant fold and stitch positions.

Consistent size terminology should be shared by design, sampling, purchasing and production teams. Technical sheets, purchase orders and warehouse labels should use the same model code and size family.

Repeatability in bulk production

A component is truly suitable only when the approved behavior can be repeated in production. If the elastic supplier, tape construction or finishing process changes, the hardware fit should be checked again. The nominal width may remain the same while the real material behavior changes.

Orientation during sewing or assembly can also matter. Keeping an approved reference sample available to the production team helps clarify how small hardware pieces should be routed and positioned.

Information to verify before purchasing

• Model code and component type
• 11 mm / 0.43 in size family
• Zamak material classification
• Single component or set structure
• Physical contents of a set
• Minimum order quantity
• The actual strap tape used in production

Checking these items together reduces many common size and component-selection errors. For set products, remember that 500 sets and 500 physical pieces do not mean the same thing; package content should always be read.

Moving the correct component from warehouse to production

Warehouse labels should identify model code and component type so rings, sliders and hooks with similar dimensions are not mixed. Production material should not be selected by visual similarity alone. A small dimensional difference can change the way a narrow strap moves or connects.

Model-code continuity is also useful for repeat orders, revisions and returns. Reordering only by a generic phrase such as “11 mm buckle” increases the risk of receiving a different component type.

Moving from sample approval to bulk production

After the sample is approved, the strap tape, hardware model and assembly method should be recorded on the technical sheet. If any of these elements changes during bulk production, a short verification sample is more reliable than assuming the original approval still applies.

How to read product attributes

Material, size, application, package content and component type answer different purchasing questions. Package content explains what is physically included in one sales unit, while minimum order quantity explains how many sales units must be ordered. The two should not be confused.