12.5 mm (0.49 in) Light Beige Plastic-Cap 54-System Snap – 100 Sets ERC00125PLABej

Light Beige 12.5 mm (0.49 in) Plastic-Cap Snap Fasteners

These 12.5 mm (0.49 in) 54-system snap fasteners are intended for garments and textile projects that need a visible light beige plastic cap rather than a metal-colored top. The complete snap combines that cap with three nickel-colored metal mating components. The subtle cap finish can complement ivory cotton, cream knitwear, beige outerwear, aprons and selected accessories. What matters for a dependable closure is not only cap color: the actual fabric thickness, the 54-system parts and the correct setting die all need to work together.

The cap is specified as 12.5 mm (0.49 in), approximately 20 ligne. The mating mechanism uses the 54 system / S-spring family. The cap diameter and the dimensions of the metal lower parts are not interchangeable measurements. A snap from another system may look similar on the garment surface yet require different dies or mating parts.

Which Components Are Plastic and Which Are Metal?

“Plastic cap” does not mean that the entire snap fastener is plastic. Each assembly has a light beige plastic cap, a metal socket (spring), a metal stud and a metal post. The three metal parts have a nickel-colored surface. Their precise base alloy is recorded inconsistently across the older catalogue entry and its duplicate, so this listing should not make an unverified claim that the components are stainless steel, brass or sheet metal. A nickel color description alone does not identify a base-metal grade.

The light beige shade may blend with ecru fabrics and warm neutrals, or provide a soft contrast to darker garments. Actual colors can appear different from screen images depending on lighting, fabric dye and photography. For repeated production, compare a cap sample directly against the approved fabric and retain the sample for future runs.

Exactly What Comes in One Pack of 100 Sets?

The pack contains 100 complete four-part snaps, not 100 individual loose parts. Its component count is 100 plastic caps, 100 metal sockets, 100 metal studs and 100 metal posts. That is 400 individual components forming 100 usable snap assemblies. Setting tools, presses, punching dies and spare parts are not included. When planning a garment run, estimate the number of closure positions first, then count complete four-part sets rather than counting every component separately.

The cap provides the visible finish on one face of the garment. The socket holds the mating stud when the snap closes; the post contributes to securing the counterpart through the textile layers. The correct placement of these parts should be planned before any die is loaded into a press. Mixing the cap or the lower parts with a different snap family risks poor engagement or surface damage.

Choose a Plastic-Cap 54-System Setting Die

The related tool identified for this product in the catalogue is the 12.5 mm (0.49 in) 54-system setting die for plastic-cap snaps. The upper die seat should support the profile of the plastic cap without cracking or flattening its visible surface. The lower pieces must support the matching metal socket, stud and post. A matching nominal cap size alone does not prove that another die will work.

With compatible fittings, this die family can be considered for manual hand presses, impact presses or suitable hand-held die holders. Verify the press connection, anvil support and die position before purchase. For production, start with a sample and watch for cap marks, a distorted spring socket, crushed fabric or a stud that fails to engage. Both the press and the die must be ordered separately from the 100-set snap pack.

Hole Preparation: Do Not Punch to the Cap Diameter

A 12.5 mm (0.49 in) cap does not require a 12.5 mm hole in the fabric. Some snap applications are installed without pre-punching, while others need a controlled opening. That decision depends on the post geometry, fabric construction, number of layers and method of setting. This specific older product record provides no verified universal hole-punch diameter, so no particular punch size should be represented as guaranteed compatible.

Before a bulk run, prepare a sample using the actual folded or reinforced area of the garment. Position both snap halves, set them with correctly matched tooling and test the closure repeatedly. Review puckering, cap damage, part alignment and whether any component pulls through the fabric. The punch that prepares an opening and the die that sets the four-part snap perform different jobs.

Fabric Selection, Wear Testing and Children's Products

Light beige caps can be considered for shirt plackets, aprons, suitable lightweight jackets, textile organizers and bag accessories. On thick leather, bulky seams or multi-layer outerwear, verify post reach and the required setting pressure first. Do not assume the same setup works for a single cotton layer and a reinforced fabric stack. Production samples should be checked for closure feel, cap marking and fabric damage after repeated opening and closing.

For babywear and children's products, assess pull-off risks, small parts and any other requirements applicable in the destination market. No particular children's safety certification is verified for this listing. The fastener should only be used after the complete finished article is evaluated for its intended purpose. Keep a record of the selected cap color, die, substrate thickness and approved test sample when producing repeat batches.

Compare Alternative Plastic-Cap Snap Families

The plastic snap and plastic-cap snap collection helps distinguish fully plastic snaps from snap assemblies with a plastic visible cap and metal mating components. These products may have similar cap colors but different fitting requirements. For a wider view of snap families and applications, explore the snap fastener range and match the mechanism as well as the exterior dimensions.

If a particular finish, material grade or production size is important, provide a photograph or sample of the mating parts and clarify the target garment construction before ordering. Since this page represents a separate older product record, its displayed stock and availability should be checked at checkout rather than inferred from other listings that share a model code.

Frequently Asked Questions

How many usable snap fasteners are in one pack?

One pack contains 100 complete four-part snap sets, made from 400 individual components.

Which four parts are included?

You receive 100 light beige plastic caps, 100 metal sockets, 100 metal studs and 100 metal posts.

Are all four pieces plastic?

No. The visible cap is plastic; the other three pieces are nickel-colored metal.

Are the metal parts stainless steel?

The precise alloy is not consistently verified for this older listing. Do not assume a stainless-steel grade without confirmation.

What is the cap size?

The light beige plastic cap measures 12.5 mm (0.49 in), approximately 20 ligne.

Which die is recommended for installation?

The catalogue identifies the KLP00125PL54 12.5 mm 54-system plastic-cap setting die. Verify the cap profile and press connection before use.

Does the package include a press or setting die?

No. The package contains 100 snap sets only; the compatible setting die and press are separate items.

Do I need to punch a 12.5 mm hole?

No. The cap diameter is not a punch diameter. Any pre-punching must be based on post geometry and material thickness; no fixed size is confirmed.

Can I use tooling from an all-plastic snap?

Do not assume compatibility based on cap diameter. The metal mating parts, 54 system and plastic-cap die seat must all match.