2.5 mm / 0.10 in Hole Cutter for Pins, Snap Fasteners, Rivets and Small Hardware PDV000025DEL

2.5 mm / 0.10 in Hole Cutter for Pins, Snap Fasteners and Rivets

This 2.5 mm / 0.10 in hole cutter is a hardened steel tool used for preparing small holes on leather, synthetic leather, fabric, cardboard, textile accessories and craft materials. It is designed for micro hole preparation before installing pins, snap fasteners, rivets and other small textile hardware.

Micro Hole Preparation Before Setting

This product is not a snap fastener, rivet or eyelet setting die. It is used before the setting process to prepare the material surface. A correctly prepared small hole helps the pin, nail or shank of the accessory pass through the material more consistently and supports a more controlled installation process.

For Pins, Alfa Snap Fasteners and 33.5 - 123 - 54 - 61 - 75 Rivet Applications

This hole cutter can be evaluated for pre-cutting holes before installing pins, Alfa snap fasteners, 33.5 - 123 - 54 - 61 - 75 rivets and related small fastening hardware. Since pin, nail and shank diameters may vary by product type, model and supplier, the actual component size should be checked before ordering.

2.5 mm / 0.10 in Small Hole Size

The 2.5 mm / 0.10 in size is suitable for small and precise hole preparation where the material needs to be opened before installing compact hardware. Material thickness, material stretch, setting die fit, component diameter and press pressure should be evaluated together before production use.

Dimensional Tolerance and Material Thickness

Small dimensional differences may be tolerated by the setting tool in some thin and medium-weight materials. On thick fabrics, tarpaulin-like surfaces, multi-layer leather or rigid materials, tolerance is reduced. A sample test is recommended before serial production.

Applications for Leather, Fabric, Accessories and Craft Projects

This cutter can be used for fine leatherwork, synthetic leather, fabric, cardboard, accessory making, craft projects, sample preparation, pin holes, small rivet holes and snap fastener pre-hole applications. The final hole quality may vary depending on material density, thickness and cutting support.

SEO-Focused Related Product and Category Links

For related installation tools, review fastening tools and dies. For compatible snap applications, review snap fasteners. For eyelet and grommet groups, visit eyelets and grommets. For controlled manual application, review the hand press machine.

Usage Information

The hole cutter should be used with a suitable lower base or cutting support. For a cleaner cut, the material should be positioned securely, the cutter should be aligned vertically and controlled pressure should be applied. On hard or thick materials, the cutting edge should not be forced and should be checked regularly.

Package Contents

• 1 hole cutter, 2.5 mm / 0.10 in
• 1 lower base
• Total: 1 micro hole cutting tool set

Application Areas

• Hole preparation before pin installation
• Hole preparation before Alfa snap fastener applications
• 33.5 - 123 - 54 - 61 - 75 rivet applications
• Fine leather, synthetic leather and fabric surfaces
• Accessory making, decoration and craft projects
• Cardboard, sample making and workshop use

Before Ordering

The hole size should be selected according to the pin, snap fastener, rivet or hardware component to be installed. If this tool will be used for pins, Alfa snap fasteners or rivet applications, the actual pin / nail / shank diameter, material thickness and setting die compatibility should be checked together. Thin materials may allow more tolerance, while thick fabrics, multi-layer leather and rigid materials reduce tolerance.

Not included: Pins, snap fasteners, rivets, eyelets, setting dies, presses, hand tools, cutting boards, converter adapters and other auxiliary equipment are not included.

Frequently Asked Questions

What is this product used for?

It is used to cut 2.5 mm / 0.10 in small holes on leather, fabric, cardboard and similar materials before installing compatible small hardware.

Can it be used for Alfa snap fasteners?

It can be evaluated for hole preparation before Alfa snap fastener applications. The actual component diameter, material thickness and setting die fit should be checked.

Can it be used for rivets?

It can be used for small hole preparation before 33.5 - 123 - 54 - 61 - 75 rivet applications when the pin or nail diameter matches the prepared hole.

Is this a setting die?

No. It is a hole cutter used before the setting stage.

What is included in the package?

The package includes 1 hole cutter and 1 lower base.