Sheet Metal Suzan Pin – 4 mm / 0.16 in Inner Diameter, 6.5 mm / 0.26 in Barrel Height, 1,000 Pieces B0018

Sheet Metal Suzan Pin with 4 mm Inner Diameter

This Sheet Metal Suzan Pin is a compact centre-opening hardware component used for fastening or decorative details in bags, wallets, card holders, belts, leather cases, organisers and textile accessories. Its shape supports a neat metal detail when installed with the correct setting die and controlled pressure.

This item is a pin component, not a setting die. It does not punch the material or perform final installation by itself. Use a matching Suzan Pin Setting Die to apply controlled pressure and form the pin correctly in the material.

Dimensions and Material

The pin has a 4 mm / 0.16 in inner diameter, a 6.3 mm / 0.25 in outer diameter and a 6.5 mm / 0.26 in barrel height. It is made from sheet metal and supplied in a 1,000-piece pack.

• Inner diameter / centre opening: 4 mm / 0.16 in
• Outer diameter: 6.3 mm / 0.25 in
• Barrel height: 6.5 mm / 0.26 in
• Material: Sheet metal
• Pack quantity: 1,000 pieces

These dimensions should be evaluated together. Material thickness, reverse-side closure form, barrel height and the setting-die surface affect the finished result.

Suitable Applications

• Leather bags, wallets and card holders
• Belts, straps, webbing and small hardware details
• Leather cases, pouches and organiser products
• Garment, hat, vest and jacket accessories
• Decorative metal details in textile products
• Sample making, repair work and small-batch production

Use a Matching Suzan Pin Setting Die

Install the pin with a matching Suzan Pin Setting Die. The setting die applies controlled pressure during installation; it does not punch the material.

For repeat production, use a physically compatible Manual Hand Press. Hand tools, impact presses, electric machines and pneumatic machines can also be used when the die holder, pressure surfaces and connection system are physically compatible.

Is Pre-Punching Required?

Pre-punching is not required for every material. Thin leather, flexible fabric and softer materials may allow direct application with the correct die and controlled pressure.

For thick leather, coated textiles, rigid cardboard, dense canvas, webbing or multilayer materials, test the actual production stack before repeat production. When a pre-hole is needed, do not select its size from the inner-diameter measurement alone.

Correct Application Sequence

1. Check material thickness, hardness and total layer count.
2. Mark the exact installation position.
3. Test whether material preparation is required.
4. Position the pin in the correct application direction.
5. Install the matching Suzan Pin Setting Die in compatible equipment.
6. Apply centred and controlled pressure.
7. Inspect the visible surface, barrel closure and holding result.

What This Product Does Not Include

• It does not include a setting die.
• It does not include a press or hand tool.
• It is not an Eyelet Setting Die.
• It is not a universal rivet, eyelet or snap component.
• It does not punch the material.

Frequently Asked Questions

What material is this Suzan Pin made from?

It is made from sheet metal.

What is the inner diameter?

The centre opening has a 4 mm / 0.16 in inner diameter.

What is the barrel height?

The barrel height is 6.5 mm / 0.26 in.

What is the outer diameter?

The outer diameter is 6.3 mm / 0.25 in.

Which tool should be used for installation?

Use a matching Suzan Pin Setting Die selected for the real pin form and the intended material structure.

Is pre-punching always necessary?

No. It depends on material thickness, hardness, layer count and the required setting result.

Are the setting die and press included?

No. The package contains the Sheet Metal Suzan Pins only.