Metal Cord End length 9 mm entry 7 mm B0001

This compact 9 mm (0.35 in) zinc-alloy cord end has a documented 7 mm (0.28 in) cord opening. It can be considered when a bag drawcord or decorative textile cord needs a neat-looking metal tip. The shorter body makes it a different option from longer metal cord ends, but the right fit is determined by the real cord and how the assembly is secured. Test a sample before ordering parts for a finished collection or repair project.

Know the Two Different Measurements

The 9 mm figure describes the listed body length. The 7 mm value describes the cord entry. They are not interchangeable dimensions. A soft braided cord can compress differently from a stiff round cord even if both have the same nominal diameter. Measure the prepared cord tip, then check how it fits the part without forcing it into the opening.

Where a Small Metal Cord Tip May Work

Cord tips can add a considered finishing detail to drawstring bags, apparel cords and other textile accessories. The metal shade can be compared with zipper pulls, rings or clasps used on the same item. Before committing to a finish, review the current product options and look at the real material under consistent lighting. Do not assume that a color visible in an older photo is available immediately.

Check the Actual Attachment Method

The technical attributes confirm the material and entry size but do not specify a definitive knotting, crimping or adhesive method for this model. It would be inaccurate to copy installation instructions from a different cord end. Work out the appropriate retention method with the physical component and your actual cord. On a trial piece, check that the tip stays in place without damaging the cord fibers.

A fit test also helps with appearance. A cord end that is too loose may sit unevenly, while excessive force can damage the braided material. Inspect both the front and the finished cord end after assembly.

Ask Us About Pre-Order Options

This item currently has zero available stock, while its product page remains active. If it looks right for your project, please get in touch to discuss whether a pre-order or new supply can be arranged. Tell us the cord diameter, preferred finish and approximate requirement. We'll be glad to help review your options, with availability and lead times confirmed before any promise is made.

A Simple Sample Checklist

1. Measure the finished cord.
2. Check its fit with the 7 mm entry.
3. Assess how the 9 mm body looks on the actual item.
4. Verify the attachment method with a sample.
5. Choose the finish using current options.
6. Confirm pre-order terms with the team before purchasing.

Frequently Asked Questions

How long is this metal cord end?

The listed body length is 9 mm (0.35 in).

What cord opening does it have?

The documented opening is 7 mm (0.28 in).

What material is used?

The product attributes specify zinc alloy, also described as zamak.

Does it need a crimping tool or a knot?

No definite attachment method is confirmed in this item's attributes. Test the actual component.

Can I choose the finish?

Check current options and discuss alternatives with E-Düğme if needed.

Can I pre-order an out-of-stock item?

Please contact E-Düğme to discuss possible pre-order or replenishment arrangements.