Plastic Cord Ends

CORD END SELECTION CENTRE

Find the Right Cord End for Your Drawstring

Compare metal and plastic cord ends for garments, hoodies, tracksuits, jackets, bags, footwear, sportswear and fashion accessories. Check the cord-entry dimensions, actual cord diameter, material, finish and attachment method before choosing the correct cord-end design.

DECORATIVE METAL FINISH

Metal Cord Ends

Browse zinc alloy, brass and other metal cord ends for garments, bags, footwear and fashion accessories. Compare cylindrical, cube, barrel, bell, crimp-on, glue-in and sew-on designs for different production methods.

Browse metal cord ends

LIGHTWEIGHT AND PRACTICAL

Explore lightweight plastic cord ends for hoodies, sportswear, bags, footwear and promotional products. Compare snap-fit, locking, capped and crimp-style constructions with different cord-entry dimensions and colour options.

Browse plastic cord ends

DRAWSTRING ADJUSTMENT

Cord Locks and Stoppers

Browse metal and plastic cord locks used to adjust drawstring length and tension. Match the lock opening to the actual cord diameter. A cord end finishes the cord permanently, while a cord lock provides adjustable movement.

Browse cord locks

COMPLETE COLLECTION

All Cord Ends and Drawstring Tips

Compare metal and plastic cord ends by cord-entry size, material, finish, attachment method and intended application. Find suitable solutions for round cords, flat drawstrings, elastic cords and woven tapes.

Browse all cord ends

Do not select a cord end by appearance alone

Measure both the actual and lightly compressed diameter of a round cord. For flat drawstrings or woven tapes, check both width and thickness. Confirm whether the cord end is fitted by crimping, gluing, sewing, threading or snap-lock assembly before ordering.

Browse Compatible Cord Locks

What Is a Plastic Cord End?

A plastic cord end is a fixed terminal accessory fitted to the cut end of a cord, drawstring, lace, string or compatible elastic. Depending on its construction, it may clamp the terminal section, hold it between two interlocking pieces, conceal it inside a capped body or create a clean and lightweight finish.

A plastic cord end is not a movable adjustment mechanism. Use a cord lock or drawstring stopper where the working cord length or gathering needs to be adjusted. Both component types may be used on the same cord assembly.

Which Plastic Cord End Should Be Selected?

Application Requirement	Model to Consider	Specification to Check
Clamp a fine cord or string	Single-piece model with a 3 mm / 0.12 in entry	Actual cord diameter and retention after closing
Finish a thicker lace	Single-piece model with an entry up to 7 mm / 0.28 in	Normal and compressed lace diameter
Hold the cord between two plastic sections	Clamp-on interlocking cord end	Inner-piece, outer-piece, passage and closed dimensions
Finish a cord inside a capped body	Bell or pear-shaped capped cord end	Cord entry, lower body diameter and total body dimensions
Minimise component weight	Plastic cord end	Component weight, body size and proportion on the finished product
Coordinate the tip with the product colour	Colour-option or paintable model	Model-specific stock colours and custom-production requirements

Plastic Cord-End Structures

Interlocking and Clamp-On Models

Interlocking plastic cord ends consist of an inner and an outer section. The cord, string or compatible elastic is positioned in the inner section, and the outer section is fitted over it to close the assembly.

A single cord-entry figure is not sufficient for these models. The inner-piece hole and outside dimensions, outer-piece passage and outside dimensions, and the fully closed body dimensions must be evaluated separately.

Interlocking parts do not automatically provide sufficient pull resistance on every cord. Complete a closure and pull test with the actual material.

Capped Bell and Pear-Shaped Models

Capped bell or pear-shaped models finish the cord inside a wider decorative plastic body. Check the overall length, width and lower body diameter in addition to the cord-entry measurement.

The category includes 5 mm / 0.20 in and 5.5 mm / 0.22 in entry versions. Because the outside body is wider than the entry, the installation sequence must be planned before assembly.

Single-Piece Clamp-On Models

Single-piece clamp-on cord ends are positioned directly around the end of the cord or lace and closed according to the component structure. The category includes a 3 mm / 0.12 in version for finer cords and a model specified for laces up to 7 mm / 0.28 in.

Excessive closing force may crack or deform the plastic body or flatten the cord.

Verified Plastic Cord-End Dimensions

The following measurements are taken from the verified products within the category. Always use the individual product page for final approval.

Model Structure	Verified Metric and Imperial Dimensions	Selection Note
Single-piece clamp-on – fine model	3 mm / 0.12 in entry; 10.5 mm / 0.41 in total length	Test with the actual fine cord before production.
Single-piece clamp-on – larger model	Entry up to 7 mm / 0.28 in; 13 mm / 0.51 in total length	Filled or rigid laces may behave differently despite the nominal diameter.
Capped bell–pear small model	17 × 10 mm / 0.67 × 0.39 in; 5 mm / 0.20 in entry; 8 mm / 0.31 in lower diameter	Do not confuse the entry with the outside body dimensions.
Capped bell–pear large model	19 × 12 mm / 0.75 × 0.47 in; 5.5 mm / 0.22 in entry; 10.5 mm / 0.41 in lower diameter	Check the size and weight of the completed body on the finished product.
Interlocking aesthetic model	Inner piece 13 × 7.5 mm / 0.51 × 0.30 in; outer piece with 4 mm / 0.16 in hole and 15 × 11 mm / 0.59 × 0.43 in body; closed 15 × 11 mm / 0.59 × 0.43 in	Verify both the 4 mm / 0.16 in passage and complete engagement of the parts.
Interlocking small model	Inner piece with 4 mm / 0.16 in hole and 24 × 10 mm / 0.94 × 0.39 in body; outer piece with 7 × 4 mm / 0.28 × 0.16 in passage and 14 × 10 mm / 0.55 × 0.39 in body; closed 18 × 10 mm / 0.71 × 0.39 in	Do not combine all inner and outer measurements into one cord-entry value.
Interlocking large model	Inner piece with 4 mm / 0.16 in hole and 35 × 12 mm / 1.38 × 0.47 in body; outer piece with 9 × 4 mm / 0.35 × 0.16 in passage and 18 × 12 mm / 0.71 × 0.47 in body; closed 13 × 21 mm / 0.51 × 0.83 in	Check both cord compatibility and the scale of the closed body.

How to Measure Plastic Cord-End Compatibility

Do not rely only on the nominal size stated by the cord supplier. Measure several points with a caliper and record a lightly compressed measurement for soft, filled or elastic materials.

Feature to Check	Why It Matters	Application Note
Outside cord diameter	Determines whether the cord can enter the component.	Measure several points without flattening the cord.
Compressed diameter	Shows how much a soft cord narrows during closing.	Compare it with the normal measurement.
Cord surface	Smooth or rigid surfaces may change clamping performance.	Pull the cord in its actual operating direction.
Finished terminal section	Heat sealing, knots or thickened sections may affect insertion.	Plan the assembly before completing the cord end.
Closed body dimensions	Determine visual scale and whether the fitted part can pass through other components.	Compare with stopper and eyelet openings.
Complete part engagement	Incomplete closure may reduce retention on interlocking models.	Check that all sections are fully seated.

Interlocking vs Single-Piece Clamp-On Models

Feature	Interlocking Model	Single-Piece Clamp-On Model
Number of pieces	Uses separate inner and outer sections.	Uses one plastic body.
Assembly	The cord is positioned in the inner section and the outer section closes over it.	The body is closed directly around the cord end.
Measurements	Inner piece, outer piece, passage and closed dimensions must be checked.	Entry, total length and closing structure must be checked.
Incorrect assembly risk	Parts may not fully engage or the cord may be incorrectly positioned.	Excess force may crack the body or crush the cord.

Capped vs Clamp-On Plastic Cord Ends

Capped bell–pear models finish the cord inside a wider decorative body. Single-piece clamp-on models are more compact and close directly around the terminal section.

For a capped model, check cord entry, total length, width and lower diameter. For a clamp-on model, check the entry, total body length and required closing force.

Colour and Custom-Production Options

Depending on the model, category products may be offered in black, white, navy, red, yellow, pink, blue and other colours. Some models may be paintable or suitable for custom-colour production.

Not every colour is continuously stocked for every model. Minimum quantity, colour approval, sampling and production conditions must be verified for custom colours, logos or dimensions.

Plastic and Metal Cord Ends Compared

Feature	Plastic Cord End	Metal Cord End
Weight	Provides a lighter terminal component.	May create a heavier and more noticeable hardware detail.
Appearance	May be coloured, plain, matt, glossy or paintable.	May use plated, painted and decorative metal surfaces.
Assembly structures	Interlocking, capped and clamp-on structures are available.	Crimp-on, knot-retained, sew-on, bond-on and pass-through structures may be available.
Primary selection reason	Low weight, colour matching and practical assembly	Metal appearance and coordination with other hardware

For metal alternatives, review the metal cord ends category.

Real-World Applications

Hoodie and sweatshirt drawstring ends
Tracksuit, shorts and sportswear cords
Bag, backpack, pouch and wallet cords
Shoe and lightweight boot laces
Lingerie and lightweight textile products
Sports equipment and promotional-item cords
Compatible strings and round-elastic ends
Textile and accessory designs requiring colour coordination

Not every plastic cord end is suitable for every application. Final selection must be based on the verified dimensions, fitting structure, colour and pack information on the individual product page.

Recommended Assembly Sequence

Measure the normal and lightly compressed cord diameter.
Thread any required cord lock onto the cord before fitting the terminal component.
Pass the cord through the garment, bag or footwear channel or eyelet.
Set the final cord length and terminal allowance.
Complete any required cutting, heat-sealing or knotting process.
Position the cord correctly in the entry or inner section.
Clamp the component, close the cap or fit the outer section over the inner section.
Confirm full closure and test that the cord does not pull out.

Incorrect Selection and Assembly Warnings

A plastic cord end and a cord lock do not perform the same function.
An opening that is too small may prevent insertion or damage the cord surface.
An opening that is too large may reduce retention.
Check inner and outer component dimensions separately on interlocking models.
Incomplete engagement may allow the parts to separate during use.
Excessive closing force may crack the plastic body or crush the cord.
Measure the compressed diameter of soft and elastic cords.
A fitted cord end may not pass through a stopper channel or eyelet.
Plastic appearance alone does not confirm wash, temperature or outdoor suitability.
Small-part and detachment risks must be assessed separately for children’s products.
Complete a sample installation with the actual cord before wholesale ordering or mass production.

Related Categories

Frequently Asked Questions About Plastic Cord Ends

What is a plastic cord end and what does it do?

A plastic cord end is a lightweight fixed terminal accessory used to clamp, cover or neatly finish the cut end of a cord, drawstring, lace, string or compatible elastic.

How do I select the correct plastic cord-end size?

Measure the outside diameter and, for soft material, the lightly compressed diameter. Compare these measurements with the verified entry, inner-piece hole or internal opening.

How is an interlocking plastic cord end fitted?

The cord is positioned in the inner section and the outer section is fitted over it. Confirm that the pieces are fully engaged and that the cord does not pull out under tension.

How is a capped plastic cord end fitted?

The cord is passed through the verified entry or positioned inside the body. The exact closure and retention method must be checked according to the individual product structure.

Does a single-piece clamp-on cord end require a press?

The required tool depends on the model and production quantity. A controlled hand tool may be sufficient, but excessive force can crack the plastic body, so sample testing is required.

Can a plastic cord end be used with round elastic?

It may be used when the entry and clamping structure are compatible. Because elastic changes diameter under compression and tension, test it with the actual material.

Should the cord lock or plastic cord end be installed first?

If the completed cord end is larger than the cord-lock channel, thread the cord lock first and fit the plastic cord end after completing the cord route.

Why do interlocking models have several measurements?

They use separate inner and outer pieces. The inner hole, outer passage, component body dimensions and fully closed size perform different functions and must be checked separately.

Are plastic cord ends machine washable?

Wash suitability cannot be determined from the plastic appearance alone. The polymer, colour treatment, assembly structure, wash temperature and detergent conditions must be evaluated.

Can plastic cord ends be produced in custom colours?

Some models may be suitable for custom colours or painting. Minimum quantity, colour approval, sampling and production conditions must be verified for each model.

Is sample testing necessary before wholesale production?

Yes. A sample confirms entry compatibility, complete closure, clamping performance, colour, body size and appearance on the finished product.

Last updated: 21 July 2026

Business and brand: E-Düğme – Istanbul, Türkiye

Technical verification note: Refer to the individual product page for exact metric and imperial entry dimensions, inner and outer component sizes, closed dimensions, colour, pack quantity and fitting method.