1 cm Paris Swivel Snap Hook – 10 mm Strap Opening A 509

1 cm Paris Swivel Snap Hook: 10 mm (0.39 in) Strap Opening

The Paris swivel snap hook is a compact, spring-gate zamak connector with a 10 mm (0.39 in) strap opening. It is designed for removable connections on compatible keychains, small bags, wallets, ID holders and accessory straps. Its spring gate lets a suitable ring enter or leave the hook, while the swivel at the strap end can help the accessory turn without forcing the strap to follow the same direction. This is a small hardware component rather than a full-size load-bearing carabiner. Choose it by strap passage, hook cavity and mating-ring dimensions, not by the number in the product title alone.

Key Measurements and How to Interpret Them

The metal body's recorded exterior is 31 mm (1.22 in) long × 12 mm (0.47 in) wide. The strap section has a 10 mm (0.39 in) pass-through width. The internal hook space is recorded as 7 mm (0.28 in) wide × 10 mm (0.39 in) long. These dimensions serve different purposes: the strap passage determines which webbing or folded leather tab may fit at the swivel, whereas the hook interior must accommodate the mating ring.

In a finished project, a nominal 10 mm (0.39 in) woven strap can be bulkier where it folds over, is stitched or includes a reinforcing layer. Test the real folded strap, not an isolated strip cut to width. Equally, a ring with a suitable-looking outside diameter may have wire too thick to pass through the spring gate or may leave insufficient free movement after attachment. The ring's wire thickness, opening clearance and the spring-gate travel should be checked together. The 31 mm (1.22 in) measurement is the overall hook length, not the width of the webbing that should be attached.

Zamak Metal and Nickel, Gunmetal and Gold Finishes

The technical product record identifies the base material as zamak metal. Zamak is not the same as stainless steel or solid brass; the chosen surface color does not redefine the base metal. Available orderable finishes are Nickel for a silver tone, Gunmetal (Black Nickel) for a dark metallic gray tone, and Gold for a gold-colored appearance. The local option label for the dark finish remains Black Nikel / Black Nickel. Gunmetal and the Turkish term Füme name the same general finish family in this product context, rather than separate metals or special performance grades.

When combining the hook with a zipper pull, ring, buckle, rivet or chain in one collection, compare physical finish samples in the same light. Digital photos, screen settings and plating batches can affect perceived color. There is no verified corrosion-test result, certified load limit or promised chemical resistance for this particular model in the current technical record. Surface appearance should therefore not be presented as a guarantee of outdoor, marine or industrial performance.

Spring Gate and Swivel: What Each Part Does

The spring gate opens to admit a compatible keyring, eye or attachment point and then returns toward its closed position. The lower swivel allows the hook body and attached strap to change orientation relative to each other. This design can make a short removable strap, ID-holder lanyard attachment or decorative bag charm easier to handle. It should not be described as a positive-locking safety mechanism: a spring gate without a dedicated lock may not be appropriate in applications where unintended release creates a hazard.

Do not pry the gate beyond its intended travel or force a thick metal ring past the opening. After assembly, confirm that the spring returns smoothly, the swivel turns without seizing, and the edges do not abrade the fabric. Where the strap experiences repeated twist or pull, inspect the sample after the intended movements. Specific cycle-life and tensile-load ratings are not documented here, so such performance must be established for the finished assembly if it is essential.

Applications: Small Bags, Keychains and Detachable Accessories

Keychains and charms: pair the hook with an appropriately sized ring or fixed eye so the accessory can be detached. Small bags and wallets: use it at the end of a narrow removable strap where the connecting ring and the expected pull direction have been tested. ID badges and card holders: its compact body can be considered for short fabric or leather tabs. Craft and leather projects: the swivel offers a metal connection between a prepared strap end and a compatible ring.

This hook is not installed with a snap-button setting die. The metal hook attaches mechanically to an appropriate ring; a textile or leather strap is secured at the swivel with the stitch, rivet or other end construction selected by the manufacturer. If a rivet is used in that separate strap-end construction, the matching rivet and installation tooling must be chosen on their own merits. Avoid describing a general eyelet or snap press as required equipment for the hook itself.

Choosing Compatible Rings and Alternative Hook Sizes

Many projects need a second component such as a keyring, O-ring, D-ring or prepared bag attachment point. These are complements, not automatically interchangeable pieces. Check the ring wire diameter and whether it can travel through the spring gate, then check that it has enough clearance in the hook's 7 × 10 mm (0.28 × 0.39 in) interior once in place. Finish coordination is useful, but geometry and installation safety take precedence over color.

Other compact Paris-style swivel hooks and keyring sizes can offer different body proportions or pack quantities. If you change to another model, do not assume an identical strap passage merely because the overall appearance is similar. Confirm the strap width, ring thickness, finish and permitted application on a sample. For small-batch production and accessory assortments, keeping one approved connection sample can reduce repeat-order confusion.

Orders, Finish Selection and Workshop Checks

The current product record specifies a minimum order of 100 pieces. Nickel, Gunmetal (Black Nickel) and Gold are the three available color-option families. Quantity price breaks are calculated from the quantity entered on the live product page; they are not a substitute for checking current stock or the completed checkout total.

Before placing a repeat order or producing hundreds of accessories, build a representative finished sample with the actual strap, stitching or riveted tab and ring. Verify that the strap fits the swivel section, the gate opens and closes freely, the ring stays engaged in normal intended movement, and the hook edges do not snag fabric. Quality control should also look for surface blemishes and inconsistent swivel action. Special finish or branded assembly requests can be discussed by sharing a sample, the required width, the connecting-ring dimensions and intended quantity.

Frequently Asked Questions About Paris Swivel Hooks

What does the 10 mm measurement refer to?

It is the strap or webbing pass-through width at the bottom swivel: 10 mm (0.39 in). The overall hook length is 31 mm (1.22 in).

What is the overall size of the hook?

The exterior is listed as 31 × 12 mm (1.22 × 0.47 in), with an internal hook space of 7 × 10 mm (0.28 × 0.39 in).

Is the hook made of stainless steel?

No. The recorded material is zamak metal. Nickel, Gunmetal (Black Nickel) and Gold identify finishes, not stainless-steel grades.

Does Gunmetal mean the same as Black Nickel?

Yes. Gunmetal (Black Nickel) is the dark metallic finish also called Füme in Turkish. The product's color choice remains Black Nickel.

What does the swivel do?

The swivel allows the hook body and the connected strap to rotate relative to one another, helping with changing orientations during normal movement.

Will any 10 mm strap fit?

Not necessarily. Check the actual strap, including folded thickness, stitching and edge finishing. The 10 mm (0.39 in) nominal passage is a width measurement.

Do I need a snap-setting press or hole punch for the hook?

Not to install the hook itself. A compatible ring and a correctly constructed strap end are needed; any separate rivet or strap tooling depends on the assembly design.

What is the minimum order quantity?

The recorded minimum is 100 pieces. The live product page shows the current quantity-based price breaks and available colors.

Is it certified for climbing or other safety-critical loads?

No certified load rating is provided for this item. Use specifically rated safety equipment for climbing, human support or other critical load applications.