1 cm Swivel Snap Hook - Keychain Hook for 10mm Straps SB-1763

10 mm Swivel Snap Hook for Keychains and Bags – SB 1763

E-Düğme SB 1763 is a compact swivel snap hook for keychains, bag accessories and narrow strap assemblies. The spring gate provides an opening point for quick attachment, while the swivel joint helps the attached strap rotate. The listed 10 mm (0.39 inch) dimension is nominal; confirm the actual strap opening and part geometry before production.

Technical specifications

• Model: SB 1763
• Nominal strap reference: 10 mm / 1 cm / 0.39 in
• Type: spring-gate swivel snap hook
• Spring-loaded opening mechanism
• Rotating attachment for flexible strap orientation
• Applications: keyrings, bag straps and textile accessories
• Verify clear strap-opening width and attachment geometry
• Select the correct compatible ring and webbing thickness
• Inspect spring closure and swivel movement before use
• Test load and assembly with the final product; no certified load rating is asserted
• Finish and available colors: check current product options

Practical design benefits

A small swivel snap hook is useful when a fixed connection would cause unwanted strap twisting. The spring gate makes daily attachment convenient, and the compact form is appropriate for small bag attachments, promotional keychains and accessory prototypes. Neither swivel movement nor the nominal width alone proves suitability for safety-critical or high-load applications.

Choosing compatible webbing and rings

Check the actual inside opening where the webbing passes, as well as the thickness and stitching bulk of the strap. Confirm that the hook mouth accommodates the intended ring and closes fully. A 10 mm nominal part may differ from another 10 mm part in its mouth, swivel and wire geometry.

Assembly and inspection

Test the hook with the actual sewn or assembled product. Inspect the gate return spring, any burrs, swivel rotation, ring engagement, surface finish and attachment security. If the strap is sewn around the attachment bar, verify adequate clearance for the finished seam. Do not assume a particular corrosion resistance or working load without verified test data.

Frequently asked questions

Does 10 mm refer to the hook mouth? It is the listed nominal size; check the exact dimension on a sample.

Does the hook rotate? The product is listed as a swivel hook; confirm free movement after assembly.

Can it be used for bag straps? Yes for suitable accessory uses after checking strap and ring fit.

Is it climbing or safety hardware? No safety certification or rated working load has been established for this listing.

Which finish will I receive? Refer to the selected live product option.

Actual dimensions and strap fit

Listed approximate dimensions are 46 × 17 mm (1.81 × 0.67 in) overall, 11.5 × 8.5 mm (0.45 × 0.33 in) at the strap attachment opening, and 5.5 × 9.5 mm (0.22 × 0.37 in) at the stated inner clearance; approximate weight is 7 g (0.25 oz). These describe different measuring points. The nominal 10 mm (0.39 in) size should not be mistaken for an exact opening at every point. Check the finished strap, mating ring and spring gate on a physical sample.

Strap fastening and complementary rivets

Leather, faux-leather or textile straps threaded through the swivel attachment can be folded back and secured by stitching or by a correctly sized rivet, depending on the strap construction. The rivet fastens the folded strap, not the metal hook body. Double-cap rivets with nominal cap diameters of 6 mm (0.24 in) or 7 mm (0.28 in) may be considered as options, but compatibility is not guaranteed. Measure the total thickness of the folded layers before selecting rivet post length, cap size and the matching setting die. Test a sample assembly and its resistance to pulling before production. Compare compatible hooks, rings and bag-hardware components within the appropriate product categories; select a rivet only after checking the actual material stack.