9.5 mm / 0.37 in Stainless Ring-Style Baby Prong Snap Fasteners, 720 Sets/Pack C0013

9.5 mm / 0.37 in Ring-Style Baby Prong Snap Fasteners

These 9.5 mm / 0.37 in stainless ring-style baby prong snap fasteners are used to create a practical opening and closing point on baby bodysuits, rompers, babywear, children’s clothing, shirts, blouses, aprons, pajamas and light textile products.

The ring-style visible top has an open, perforated shape. It gives a lighter look than capped snap fasteners and can be useful when the fabric color or garment design should remain visually soft and minimal.

Product Structure

This ring-style prong snap fastener is a 4-part system. The ring-style prong top part, female snap part, male snap part and bottom prong ring must be installed in the correct order with the correct setting die.

Important: Part order, fabric thickness and die compatibility directly affect the installation result. A wrong die may deform the ring-style top, leave the snap loose or cause poor closing performance.

Technical Details

• Snap size: 9.5 mm / 0.37 in
• Size group: 15L
• Product type: Stainless ring-style / perforated baby prong snap fastener
• Material: Stainless steel
• Top part type: Ring-style / perforated prong top
• Prong top diameter: 9.5 mm / 0.37 in, height 4.40 mm / 0.17 in
• Female socket diameter: 9.5 mm / 0.37 in
• Male stud diameter: 9.5 mm / 0.37 in
• Prong ring diameter: 9.5 mm / 0.37 in, height 3.60 mm / 0.14 in
• Package: 720 sets / pack
• Application area: Babywear, bodysuits, children’s clothing, shirts, blouses, aprons, pajamas and light textiles

Installation and Die Compatibility

A compatible ring-style prong snap setting die for 9.5 mm / 0.37 in snap fasteners is required. It can be used with a hand press, lever machine, motorized machine or automatic machine when the correct tool is selected.

Installation Warning: Do not use capped snap dies, pearl snap dies or dies for other sizes. The wrong die can deform the ring-style top, weaken the setting or damage the fabric.

Before production, test the snap on the real fabric. Check fabric grip, closing sound, opening resistance, top-part alignment and behavior after washing or repeated opening and closing.

Ring-Style vs Capped Baby Snap Fasteners

The ring-style version has an open top shape and creates a lighter visible detail on the fabric. A capped prong snap has a closed top surface and gives a smoother covered appearance. The best choice depends on the garment design, fabric color and desired visible finish.

Important: Ring-style, capped and pearl baby snaps may look similar in size, but their visible top style and setting die requirements are different. Do not mix setting dies between these product types.

Why Stainless Steel Matters

Stainless steel snap fasteners are preferred when better resistance to moisture, washing and everyday use is required. This is especially important for babywear and children’s clothing, where material reliability affects product quality.

Important: Stainless steel provides better resistance in standard use, but harsh chemicals, aggressive washing conditions or unsuitable detergents may still affect product performance. Test the snap according to fabric, washing and end-use conditions before production.

Common Questions Before Ordering

What size is this snap fastener?

It is 9.5 mm / 0.37 in and belongs to the 15L baby prong snap size group.

How many sets are in one pack?

The product is supplied as 720 sets per pack.

Is this a capped or ring-style snap?

This is a ring-style / perforated baby prong snap fastener. It is different from capped 9.5 mm snap models.

Where can it be used?

It can be used on bodysuits, babywear, children’s clothing, shirts, blouses, aprons, pajamas and light textile products.

Which setting die is required?

A compatible 9.5 mm / 0.37 in ring-style prong snap setting die is required.

Can it be installed with a hand press?

Yes. It can be installed with a hand press when the correct die is used. Sample testing is recommended before production.

What is the difference from capped 9.5 mm snap fasteners?

The capped model has a closed top surface. The ring-style model has an open, perforated top part and gives a lighter visible appearance.

Can the pearl snap die be used for this product?

No. Pearl snap dies are different. This product requires the compatible 9.5 mm ring-style prong snap setting die.

What is the difference from the 250-set version?

This 720-set pack is better for regular production and higher-volume use. The 250-set pack is more practical for smaller batches, sampling and boutique production.

Why choose stainless steel?

Stainless steel provides better resistance to standard moisture, washing and everyday use, which is important for babywear and children’s clothing.