15 mm / 0.59 in Stainless Steel 61 System Curved Snap Fasteners, 75 Sets C0004P15PK

15 mm / 0.59 in Stainless Steel 61 System Curved Snap Fasteners are designed for projects that need a functional closure with a substantial metal appearance. Their slightly domed cap creates a more defined surface detail than a flat snap fastener, making this style suitable for jackets, coats, rainwear, workwear, denim outerwear, bags, textile organizers, and selected upholstery projects.

The snap is made from stainless steel and uses a standard metal-retainer 61 System construction. Stainless steel is a useful choice for products that see frequent handling, regular washing, or occasional exposure to moisture. For marine products, swimwear, or articles exposed repeatedly to saltwater, chlorine, or aggressive chemicals, test the completed item under real conditions before approving full production.

When is a 15 mm 61 System snap the right choice?

This size is suitable when the closure needs to be more noticeable and more substantial than a lightweight baby snap or a small shirt snap. It works well for jacket fronts, cuffs, rainwear closures, bag flaps, overshirts, denim garments, uniforms, and textile accessories.

For delicate shirts, bodysuits, lightweight baby garments, or fine knitwear, a smaller snap diameter may offer a more balanced finish. For very thick multilayer fabrics or high-stress closure points, confirm material thickness, post length, and closure behavior with a sample installation before production.

What is included in one complete snap set?

Each snap fastener is made from four matching components:

• Cap: The slightly domed visible outer component
• Socket: The receiving side of the closure
• Stud: The male component that clicks into the socket
• Post: The back component that secures the assembly through the material

The pack includes 75 complete sets, equal to 300 individual components. For consistent closure action, keep the cap, socket, stud, and post within the same 61 System application.

Finish options and design use

Available finish options include nickel, Black Nickel, gold-look yellow, antique yellow, black oxide, and tin oxide. Nickel works well with silver-toned zippers and hardware, while Black Nickel is suited to charcoal, black, navy, and dark leather projects. Antique and gold-look finishes can support more vintage, heritage, or decorative outerwear designs.

For other materials, sizes, and closure styles, review the snap fasteners and snap buttons collection before finalizing your production choice.

Installation guidance

Use a matching 15 mm / 0.59 in 61 System snap setting die to install this product. The correct die supports the curved cap, aligns the lower components, and helps prevent uneven pressure marks during application.

The snap can be installed with hand-setting equipment, a manual press, an impact press, an electric machine, or a pneumatic machine when the correct die connection is used. The M0099 hand press fastening machine is a practical option for workshops applying compatible snaps, eyelets, rivets, and covered buttons.

Always run a trial installation on the actual production material. Check cap alignment, closure feel, reverse-side appearance, and holding performance. Stretch fabrics, loose weaves, and thin textiles may need a suitable backing or stabilizer around the installation point.

Custom logo production

The cap can be developed with a custom logo, brand name, surface texture, or finish for branded accessory projects. For custom production, share your cap diameter, desired finish, logo artwork, and estimated quantity with our team so the right production method can be evaluated.

Frequently Asked Questions

Does the pack contain 75 individual parts or 75 complete snap sets?

The pack contains 75 complete snap sets. Each set has four components, for a total of 300 individual pieces.

What is the actual size of this snap fastener?

The cap diameter is 15 mm / 0.59 in, also identified as 24L in ligne sizing.

Can these snaps be used on jackets and rainwear?

Yes. This 15 mm size is well suited to jackets, rainwear, coats, denim outerwear, workwear, and bags when installed with the correct die.

Are these snaps fully stainless steel?

The product is listed as stainless steel. This makes it a more suitable choice for standard apparel and accessory use where moisture resistance is important.

Is the setting die included?

No. The snap fasteners are supplied separately. Select the matching 15 mm 61 System setting die according to your installation equipment.

Can the cap be customized with my brand logo?

Yes. Custom logo and branded cap production can be evaluated for suitable production quantities. Contact us with your logo, finish preference, and requested quantity.