40 mm Plastic Swivel Cup-Style Bag Hook – For 1.57 in Webbing AL005551

Plastic Swivel Cup-Style Bag Hook for 40 mm Webbing

This plastic swivel cup-style bag hook is designed to create a detachable strap connection on shoulder bags, backpacks, sports bags, travel products and other textile accessories.

The cup-style movable connection allows the webbing attachment section to change direction relative to the hook body. This can help a removable shoulder strap sit more naturally as the bag changes position during use.

Compatible Webbing Class

The product belongs to the 40 mm / approximately 1.57 in nominal webbing class.

The 40 mm designation should not automatically be interpreted as a confirmed exact internal opening. Actual webbing width, thickness, weave and folded construction should be checked before production.

What Does 40 mm Mean?

The 40 mm / 1.57 in value identifies the nominal webbing or strap class. The exact internal webbing opening, hook opening and overall external dimensions have not been verified and should not be estimated.

Swivel Cup-Style Connection

The cup-style movable joint allows the strap attachment section to change direction relative to the hook body.

This can provide more freedom of movement than a completely fixed plastic hook and can be useful on detachable shoulder straps.

The exact movement angle has not been verified. The product should therefore not be advertised as a confirmed 360-degree swivel.

Typical Applications

• Shoulder bags
• Backpacks
• Sports bags
• Travel bags
• Waist bags
• Promotional bags
• Textile carrying products
• Detachable strap systems

Installation

Check the actual webbing width and thickness before installation. Pass the webbing through the strap attachment section and secure it according to the finished product design.

The hook can then be attached to a compatible D-ring or frame ring. Confirm that the hook closes completely and that the cup-style movable connection operates without binding.

No dedicated setting die or press is required for the hook itself.

D-Ring and Frame Compatibility

The section thickness and geometry of the mating ring should also be checked. A ring that is too thick may prevent the hook from closing completely.

Test the actual hook, webbing and ring combination before bulk production.

40 mm vs. Other Sizes

This model belongs to the 40 mm / 1.57 in webbing class. For 30 mm webbing, use AL005552. For 25 mm webbing, use AL005553.

AL005551 vs. AL005551A

These are different products. AL005551 is the swivel cup-style bag hook, while AL005551A is a separate 40 mm plastic D-ring.

Choosing the Correct Component

Check actual finished webbing width, thickness, weave structure and the thickness created where the strap is folded and sewn.

The mating ring should also be physically tested with the hook before production.

Plastic vs. Metal Hardware

Plastic construction can provide a lighter alternative to metal hardware. However, load performance should not be assumed to match a metal hook without testing.

Safety Limitations

This product is intended as bag and textile hardware. It must not be used for climbing, human support or life-safety applications.

Package Contents

The order contains the selected quantity of plastic swivel cup-style bag hooks.

Webbing, D-rings, frame rings, adjusters and other hardware are not included.

Minimum Order Quantity

The minimum order quantity is 250 pieces.