25 mm Plastic Swivel Cup-Style Bag Hook – For 0.98 in Webbing AL005553

Plastic Swivel Cup-Style Bag Hook for 25 mm Webbing

This plastic swivel cup-style bag hook is designed to create a detachable strap connection on shoulder bags, backpacks, waist bags, sports bags, travel products and textile accessories.

Its swivel cup-style connection allows the webbing attachment section to change direction relative to the hook body. This can help a removable shoulder strap sit more naturally as the bag changes position during use.

Compatible Webbing Class

The product belongs to the 25 mm / approximately 0.98 in nominal webbing class.

The 25 mm designation should not automatically be treated as a confirmed exact internal opening. Actual webbing width, thickness, weave and folded construction should be checked with the physical component before production.

What Does 25 mm Mean?

The 25 mm / 0.98 in value identifies the nominal webbing or strap class. The exact internal opening, overall dimensions and hook-opening measurement have not been verified and should not be estimated.

Swivel Cup-Style Connection

The cup-style joint allows the strap attachment section to change direction relative to the hook body. This can provide a more flexible connection than a completely fixed plastic hook.

The exact movement or rotation angle has not been verified. The product should therefore not be advertised as a confirmed 360-degree swivel.

Typical Applications

• Shoulder bags
• Backpacks
• Waist bags
• Sports bags
• Travel bags
• School bags
• Promotional bags
• Textile carrying products
• Detachable strap systems

Installation

Check the actual webbing width and thickness before installation. Pass the webbing through the strap attachment section and secure it according to the construction of the finished product.

The hook can then be attached to a compatible D-ring or frame ring. Confirm that the hook closes completely and that the swivel cup-style joint moves without binding.

No dedicated setting die or press is required for the hook itself.

D-Ring and Frame Compatibility

Webbing width is not the only compatibility factor. The section thickness and geometry of the mating D-ring or frame ring should also be checked.

An excessively thick ring may prevent the hook from closing correctly. Test the actual hardware combination before production.

25 mm, 30 mm and 40 mm Versions

This product belongs to the 25 mm / 0.98 in webbing class. The AL005552 model covers the 30 mm class, while AL005551 covers the 40 mm class.

These size classes should not automatically be treated as interchangeable.

Choosing the Correct Component

Check actual finished webbing width, thickness, weave construction and the thickness created where the strap is folded and sewn.

The mating ring should also be physically tested with the hook before bulk production.

Plastic vs. Metal Hardware

Plastic construction can provide a lighter connection than metal hardware. However, its load performance should not be assumed to match a tested metal hook.

Safety Limitations

This product is intended as bag and textile hardware. It must not be used for climbing, human support or life-safety applications.

Package Contents

The order contains the selected quantity of plastic swivel cup-style bag hooks.

Webbing, D-rings, frame rings, adjusters and other hardware are not included.

Minimum Order Quantity

The minimum order quantity is 500 pieces.