18 mm / 0.71 in 28L Denim Wear Logo Nickel-Plated Brass Jeans Button Fixed Cup 100 Pieces DK00018DNMWEARPROMO

18 mm / 0.71 in Denim Wear Logo Jeans Button

This 18 mm / approximately 0.71 in, 28L Denim Wear logo jeans button is a press-set garment button for jeans, denim jackets, coats, waistcoats, skirts, shorts, overalls and similar textile products. It is made from brass and has a nickel-plated silver-tone finish.

The 18 mm size provides a slightly more prominent metal detail than a 17 mm button while remaining smaller than a large 20 mm jeans button. Its fixed-cup construction must be installed with tooling prepared for the exact button structure.

When Should This Button Be Selected?

• When an 18 mm / 0.71 in jeans button is required
• When the product specification calls for a 28L button
• When a Denim Wear logo face is preferred
• When a silver-tone nickel finish suits the design
• When a fixed-cup press-set button is required
• For jeans, denim jackets, coats, skirts and overalls

Size and Construction

What Does 18 mm / 28L Mean?

The 18 mm / 0.71 in measurement refers to the visible diameter of the upper button cap. The product page identifies the garment-button size as 28L.

Button selection should also consider buttonhole width, waistband or placket thickness, total material layers, lower fastening component, cup profile and the exact setting die.

Fixed-Cup Construction

In a fixed-cup jeans button, the connection section below the visible cap does not move independently. The lower die must support this fixed profile and align it with the compatible lower fastening component.

A die produced for another 18 mm button may have a different upper cavity or lower support profile and must not be assumed to fit automatically.

Denim Wear Logo Face

Denim Wear identifies the logo design on the visible upper face. The upper die should support the cap without pressing directly onto or marking the logo area.

Do not add claims about the exact lettering, embossing depth, surface texture or logo orientation until verified real product photographs have been uploaded.

Difference from 17 mm and 20 mm Buttons

The 18 mm / 0.71 in cap is slightly larger than a 17 mm / 0.67 in button and smaller than a 20 mm / 0.79 in button. These sizes should not be exchanged without checking the buttonhole, garment proportions and tooling.

This model is also distinguished by its Denim Wear logo face, nickel finish and fixed-cup construction.

Typical Applications

• Jeans waistbands
• Denim jackets and coats
• Denim skirts and shorts
• Waistcoats and overalls
• Heavy cotton workwear
• Denim bags and textile accessories
• Button replacement and repair work
• Samples and boutique collections

Selecting the Correct Setting Die

Use a custom 18 mm setting die prepared for the actual Denim Wear logo cap and fixed-cup construction. A 14 mm or 17 mm jeans-button die must not be presented as compatible.

Provide the exact button reference when requesting tooling so the upper and lower die profiles can be matched to the physical button structure.

Checks Before Installation

• Confirm the 18 mm / 0.71 in button diameter.
• Check that the buttonhole suits the larger button size.
• Seat the Denim Wear cap level inside the upper die.
• Confirm that the lower die supports the fixed cup.
• Select the lower fastener for the total material thickness.
• Adjust pressing force gradually.

Discounted Export-Surplus Package

The product is supplied as a discounted export-surplus package containing 100 buttons. It is suitable for workshop production, repairs, samples and boutique garment collections.

Inspect several pieces for finish appearance, fixed-cup condition and die compatibility before using the complete package in production.

Related Product Groups

Add internal links only to verified English-language jeans-button, setting-die and press pages. Do not add the 14 mm or 17 mm dies currently displayed among the old related products.

Frequently Asked Questions

Content last updated: July 23, 2026 — E-Düğme