14 mm / 0.55 in Star Logo Nickel-Plated Jeans Button Plastic Cup 75 Pieces DK00014YLDZPPROMO

14 mm / 0.55 in Star-Logo Jeans Button

This 14 mm / approximately 0.55 in, 22L jeans button is a press-set garment button intended for jeans, denim jackets, coats, waistcoats, skirts, shorts and related textile products. It has a brass upper body, nickel-plated finish, star-logo face and plastic-cup lower construction.

The smaller 14 mm size provides a compact metal-button appearance for denim garments where a 17 mm button would look too prominent. The product is supplied as a discounted export-surplus pack containing 75 pieces.

When Should This Button Be Selected?

• When a 14 mm / 0.55 in, 22L jeans button is required
• When a star-logo metal appearance is preferred
• When a silver-tone nickel finish suits the garment design
• When a plastic-cup press-set jeans button is required
• For denim trousers, jackets, coats, skirts and waistcoats
• For sampling, repairs, boutique production or workshop use

Size and Construction

What Does 14 mm / 22L Mean?

The 14 mm / 0.55 in measurement refers to the visible diameter of the upper button cap. The 22L value is the corresponding ligne size used in garment-button measurement.

Button selection should also consider buttonhole width, waistband or placket thickness, fabric layers, tack construction and the exact setting die.

Plastic-Cup Construction

The plastic cup forms the supporting and connection area below the visible brass cap. Because of this construction, a generic 14 mm die may not support the button correctly.

How Is It Different from Similar Buttons?

This model is identified by its 14 mm / 22L size, star-logo face, nickel finish and plastic-cup backing. It is not the same as a plain-face, written-logo, metal-cup, swivel-cup or 17 mm / 28L jeans button.

It is also not a sew-on button. It is installed by joining the button to a compatible lower tack using the correct die and press.

Typical Applications

• Jeans waistband buttons
• Denim jackets and coats
• Denim skirts and shorts
• Waistcoats and overalls
• Denim bags and textile accessories
• Workwear and heavy cotton garments
• Jeans repairs and button replacement
• Samples and boutique collections

Installation Requirements

Use a custom 14 mm / 22L jeans button setting die prepared for the actual cap and plastic-cup form. The die can be used with a compatible manual hand press, impact press or suitable installation machine.

The tack length must suit both the button and the total fabric thickness. A tack that is too short may not lock correctly, while an excessively long tack can leave the button loose or misaligned.

Checks Before Installation

• Confirm the 14 mm / 0.55 in, 22L button size.
• Confirm that the die matches the star-logo cap and plastic cup.
• Select the tack according to the button and material thickness.
• Align all fabric layers before pressing.
• Seat the cap fully and evenly in the upper die.
• Adjust pressing force gradually.

Discounted Export-Surplus Package

The product is supplied in a discounted export-surplus package of 75 pieces. It is suitable for repairs, samples, boutique production and workshop requirements.

Check the finish, plastic-cup condition and installation compatibility on a sample before using the complete package in production.

Related Products and Equipment

• Custom 14 mm / 22L jeans button setting die
• Manual hand press
• Lightweight manual impact press
• Jeans button setting tools
• Brass and stainless steel jeans button categories

State the exact jeans button product code in the order notes when purchasing a custom die. The 14 mm diameter alone does not confirm compatibility.

Frequently Asked Questions

Content last updated: July 23, 2026 — E-Düğme