10 mm / 0.39 in Zamak Bra Strap Slider and Ring 2-Piece Set combines one slider and one ring in a Zamak hardware set.
Role of the set
This 2-piece set combines the slider that adjusts strap length with the ring used at a connection or direction-change point. Managing both parts in the same 10 mm / 0.39 in family can simplify sourcing and inventory for repeat production. A hook is not included.
For production, This 2-piece set combines the slider that adjusts strap length with the ring used at a connection or direction-change point. Managing both parts in the same 10 mm / 0.39 in family can simplify sourcing and inventory for repeat production. A hook is not included.
10 mm / 0.39 in size family
Both components belong to the nominal 10 mm / 0.39 in hardware family. Actual tape width, thickness, elasticity and edge construction can vary, so physical approval should use the real production tape on a completed sample.
For production, Both components belong to the nominal 10 mm / 0.39 in hardware family. Actual tape width, thickness, elasticity and edge construction can vary, so physical approval should use the real production tape on a completed sample.
Zamak material
The slider and ring are classified as Zamak. Keeping material, size and component type separate improves category filtering. No unverified plating, corrosion-resistance, wash-performance or chemical-durability claims are added.
For production, The slider and ring are classified as Zamak. Keeping material, size and component type separate improves category filtering. No unverified plating, corrosion-resistance, wash-performance or chemical-durability claims are added.
Package content
One sales unit contains one slider and one ring. A hook is not included. Package content and minimum order quantity are different concepts. The minimum order is 500 sets, representing 500 sliders and 500 rings.
For production, One sales unit contains one slider and one ring. A hook is not included. Package content and minimum order quantity are different concepts. The minimum order is 500 sets, representing 500 sliders and 500 rings.
Applications
The set can be considered for bras, bralettes, bikinis, swimwear, bodysuits and similar adjustable-strap garments. It is useful where a hook is not required or is handled separately.
For production, The set can be considered for bras, bralettes, bikinis, swimwear, bodysuits and similar adjustable-strap garments. It is useful where a hook is not required or is handled separately.
Difference from single components
A single slider or single ring offers flexibility when only one component is needed. The 2-piece set is useful when both parts are consistently consumed together in the approved construction. The correct choice should follow the actual bill of materials.
For production, A single slider or single ring offers flexibility when only one component is needed. The 2-piece set is useful when both parts are consistently consumed together in the approved construction. The correct choice should follow the actual bill of materials.
Difference from the 3-piece set
The 3-piece set adds a hook to the slider and ring. If the garment does not use a hook, the 3-piece format may add an unnecessary component. If a hook is required, the 3-piece set can be the more appropriate buying format.
For production, The 3-piece set adds a hook to the slider and ring. If the garment does not use a hook, the 3-piece format may add an unnecessary component. If a hook is required, the 3-piece set can be the more appropriate buying format.
Live related products
Use the live Bra Rings, Hooks and Strap Adjustment Buckles category for comparison. The live 10 mm / 0.39 in single slider, 10 mm / 0.39 in single ring and 10 mm / 0.39 in 3-piece set show different buying formats and functions.
For production, Use the live Bra Rings, Hooks and Strap Adjustment Buckles category for comparison. The live 10 mm / 0.39 in single slider, 10 mm / 0.39 in single ring and 10 mm / 0.39 in 3-piece set show different buying formats and functions.
Sample testing
Check controlled tape movement through the slider, correct ring angle and acceptable folded strap thickness together. Testing the two components separately is not enough; approve the completed strap assembly on the real production tape.
For production, Check controlled tape movement through the slider, correct ring angle and acceptable folded strap thickness together. Testing the two components separately is not enough; approve the completed strap assembly on the real production tape.
Technical sheet
Record model product, 2-piece set type, 10 mm / 0.39 in size, Zamak material and package content. Recording the strap-tape reference on the same sheet makes the approved combination easier to reproduce.
For production, Record model product, 2-piece set type, 10 mm / 0.39 in size, Zamak material and package content. Recording the strap-tape reference on the same sheet makes the approved combination easier to reproduce.
Bulk production
Compare initial completed straps with the approved sample. Slider movement and ring angle should remain consistent. If behavior changes, review tape lot, assembly direction and stitching together.
For production, Compare initial completed straps with the approved sample. Slider movement and ring angle should remain consistent. If behavior changes, review tape lot, assembly direction and stitching together.
Purchasing checks
Before ordering, confirm that this is the 2-piece set, that it includes a slider and ring, that size is 10 mm / 0.39 in and that material is Zamak. If a hook is required, plan it separately or choose the 3-piece set.
For production, Before ordering, confirm that this is the 2-piece set, that it includes a slider and ring, that size is 10 mm / 0.39 in and that material is Zamak. If a hook is required, plan it separately or choose the 3-piece set.
Warehouse management
2-piece sets should remain separate from single components and 3-piece sets. A generic label such as 10 mm set can create picking errors. Model product should be visible on shelf and box labels.
For production, 2-piece sets should remain separate from single components and 3-piece sets. A generic label such as 10 mm set can create picking errors. Model product should be visible on shelf and box labels.
Signs of a mismatch
If the tape binds in the slider, has excessive play at the ring or creates an unstable connection angle, review the relationship between both components and the strap tape.
For production, If the tape binds in the slider, has excessive play at the ring or creates an unstable connection angle, review the relationship between both components and the strap tape.
Quality control
Confirm that both components are present, show no obvious deformation and that the completed strap behaves like the approved sample. A missing component directly disrupts production flow.
For production, Confirm that both components are present, show no obvious deformation and that the completed strap behaves like the approved sample. A missing component directly disrupts production flow.
Production planning
An order of 500 sets represents 500 sliders and 500 rings. Consumption depends on how many sets are used per finished garment. Demand can be consolidated when several styles use the same approved set.
For production, An order of 500 sets represents 500 sliders and 500 rings. Consumption depends on how many sets are used per finished garment. Demand can be consolidated when several styles use the same approved set.
Repeat orders
Use model product together with 2-piece set type, 10 mm / 0.39 in size and Zamak material. A generic slider-ring set description can be confused with another size or material.
For production, Use model product together with 2-piece set type, 10 mm / 0.39 in size and Zamak material. A generic slider-ring set description can be confused with another size or material.
Care approach
No verified special coating endurance or chemical-care specification is provided, so those claims are not added. Final garment care should consider the complete material system.
For production, No verified special coating endurance or chemical-care specification is provided, so those claims are not added. Final garment care should consider the complete material system.
Frequently Asked Questions
What is included?
1 slider + 1 ring.
Is a hook included?
No.
What is the material?
Zamak.
What is the size?
10 mm / 0.39 in.
What is the minimum order?
500 sets.
Is sample testing needed?
Yes.
Additional production verification
Test the slider and ring again with the current production tape. If tape lot or stitching method has changed, previous approval should not automatically be considered valid. A short verification sample confirms that both components still work correctly in the same strap system before larger quantities are assembled.
Where the 2-piece set fits in the bill of materials
product contains one bra strap slider and one ring in each sales unit. This format can simplify purchasing and warehouse handling when those two components are consistently consumed together in the approved garment construction. A hook is not included. If the design also uses a hook, it should be planned separately or the 3-piece set should be considered. The buying format should follow real component consumption rather than the assumption that a larger set is automatically the better choice.
Set quantity versus physical component quantity
The minimum order is 500 sets. That represents 500 sliders and 500 rings, or 1,000 physical components in total. Warehouse counts and production planning should not treat 500 sets as 500 individual pieces. The technical sheet should state the physical contents clearly so purchasing, warehouse and production teams use the same definition. Single sliders and single rings should remain separate inventory items rather than being merged with set stock.
Testing both components with the real strap tape
The slider should move the strap in a controlled way while the ring should sit at the intended connection angle. Both behaviors should be approved on the same sample. Tape thickness, elasticity and fold construction can affect the two components differently, so checking them separately is not enough. If the tape supplier or production lot changes, a short verification sample should confirm that adjustment movement and ring position remain consistent before a larger run is assembled.
Repeat-order and warehouse identification
Repeat orders should use model product together with the 2-piece set type, 10 mm / 0.39 in size family and Zamak material. The warehouse label should carry the same information so the set is not confused with single components or the 3-piece set. Keeping an approved reference sample near the production line also helps operators confirm routing, fold direction and component placement when a style is repeated or a new team member joins the process.