10.5 mm / 0.41 in White Pearl Stainless Prong Snap Fasteners, 100 Sets/Pack ERBCLK0008BSD

What Are 10.5 mm / 0.41 in White Pearl Prong Snap Fasteners Used For?

These 10.5 mm / 0.41 in white pearl stainless prong snap fasteners are used to create practical opening and closing points on babywear, rompers, children’s clothing, fine jersey, stretch knit, light garments, handmade textile products, accessories and decorative sewing projects.

The white pearl visible top turns the snap from a purely functional fastener into a decorative detail. It gives light-colored fabrics a clean and coordinated finish while also working as a soft contrast detail on colored fabrics.

What Makes Pearl Prong Snaps Different?

Pearl prong snaps have a decorative pearl-look top surface. They are different from plain capped metal prong snaps and ring-style / perforated prong snaps. The visible finish, cap structure and setting die requirement are different.

Important: Pearl prong snaps should not be installed with dies made for ring-style snaps, plain capped snaps or another snap size. Use the correct pearl snap setting die for this size.

Technical Details

• Product type: White pearl stainless prong snap fastener
• Snap size: 10.5 mm / 0.41 in
• Size group: 17L
• Cap size: 11.5 mm / 0.45 in
• Material: Stainless lower parts
• Visible top: White pearl cap appearance
• Package content: 100 sets / pack, 100 pcs of each part
• Installation method: Special setting die with hand press, lever machine, motorized or automatic machine

Application Areas

These white pearl prong snaps can be used on baby rompers, bodysuits, children’s clothing, fine jersey garments, stretch knit fabrics, light garments, boutique textile production, handmade sewing projects and decorative accessories.

The white pearl finish is especially useful for soft, light-colored, baby-themed and elegant designs where the visible snap should support the final appearance of the product.

Correct Setting Die Selection

A compatible 10.5 mm / 0.41 in pearl snap setting die is required. The die helps the pearl top seat correctly without damage and helps the prongs grip the fabric evenly.

Installation Warning: Dies for 10.5 mm capped metal snaps, 10.5 mm ring-style snaps or 9.5 mm pearl snaps should not be used for this product. A wrong die may damage the pearl top, leave the snap loose or deform the fabric.

The snap can be installed with a hand press, lever machine, motorized machine or automatic machine when the correct die and press setting are used.

Why Sample Testing Matters

Snap setting quality is important for babywear and children’s clothing because snaps are opened and closed frequently. Very thin, stretch, layered or reinforced fabrics can behave differently during installation.

Application Warning: Test with the same fabric, same reinforcement layer and same press setting before production. Check closing sound, opening resistance, fabric rotation and post-wash appearance.

Choosing Between 10.5 mm and 9.5 mm Pearl Snaps

The 10.5 mm pearl snap gives a larger and more visible pearl top than the 9.5 mm group. Choose 10.5 mm when the pearl detail should be more noticeable. Choose 9.5 mm when a smaller and more minimal pearl snap appearance is needed.

Important: 9.5 mm and 10.5 mm pearl snaps require different setting dies. When the snap size changes, the setting tool must also change.

Common Questions Before Ordering

What size is this snap fastener?

It is 10.5 mm / 0.41 in and belongs to the 17L prong snap size group.

How many sets are in one pack?

One pack contains 100 sets, with 100 pcs of each part.

Is this a pearl snap?

Yes. It has a white pearl visible top.

Are the lower parts stainless?

Yes. The lower parts are stainless metal parts.

Which setting die is required?

A compatible 10.5 mm / 0.41 in pearl snap setting die is required.

Can it be installed with a hand press?

Yes. It can be installed with a hand press when the correct 10.5 mm pearl snap die is used.

Can it be used for babywear?

Yes. It can be used on babywear, rompers and children’s clothing. Sample testing is recommended before production.

Is it the same as a 10.5 mm capped metal snap?

No. This product has a white pearl top. Plain capped metal snaps have a different visible finish and may require a different die.

Can a ring-style snap die be used?

No. Ring-style snap dies are different. Use a pearl snap setting die for this product.

Which fabrics should be tested first?

Fine jersey, stretch knit, layered babywear fabrics, reinforced areas and fabrics with different thicknesses should be tested before production.