Plastic Snap Fasteners and Plastic Cap Snap Buttons
Plastic snap fasteners are closure components used in babywear, children’s clothing, lightweight garments, shirts, coats, jackets, bags, home textiles, craft projects and accessory applications. This category should not be evaluated as a single product type only. Some snap fasteners are fully plastic, while some models have a plastic cap combined with metal bottom parts.
In the E-Dugme plastic snap fasteners category, you can compare different sizes such as 10.5 mm / 0.41 in, 12.5 mm / 0.49 in, 15 mm / 0.59 in, 17 mm / 0.67 in and 19 mm / 0.75 in. Some products have a plastic cap, socket, stud and bottom part structure. In other products, only the top cap is plastic, while the bottom 3 parts may be produced from brass, stainless steel or iron depending on the model. For this reason, plastic snap selection should be based not only on colour, but also on the technical structure of the snap fastener.
Fully Plastic Snap Fasteners vs. Plastic Cap Snap Buttons
The most important technical difference in this category is whether the whole snap set is plastic or only the visible cap is plastic. Fully plastic snap fasteners have plastic construction in the cap, socket, stud and bottom parts. Plastic cap snap buttons have a plastic visible cap, while the lower connection parts can be metal depending on the product model.
| Product Structure | Part Material | Selection Note |
|---|
| Fully Plastic Snap Fasteners | The cap, socket, stud and bottom parts are plastic. | Can be considered for lightweight use, colour-focused designs and applications where a full plastic structure is preferred. |
| Plastic Cap Snap Buttons | The visible cap is plastic; the bottom 3 parts may be brass, stainless steel or iron depending on the model. | Suitable when a plastic cap appearance is required together with metal lower parts. |
| Plastic Cap with Brass Bottom Parts | Plastic cap with brass lower connection parts. | Finish, snap system, size and setting die compatibility should be checked on the product page. |
| Plastic Cap with Stainless Bottom Parts | Plastic cap with stainless steel lower parts. | Can be evaluated for products exposed to frequent use, moisture or outdoor conditions depending on the application. |
| Plastic Cap with Iron Bottom Parts | Plastic cap with iron lower parts. | Can be used for standard textile and accessory applications where the product model supports this structure. |
What Should You Check Before Choosing Plastic Snap Fasteners?
When choosing plastic snap fasteners, the visible cap colour alone is not enough. Especially in plastic cap snap buttons, the material of the bottom 3 parts can affect installation compatibility and product performance. For this reason, the size, snap system, cap material, bottom parts material, pack quantity and compatible setting die should be reviewed together before ordering.
| Selection Criteria | Why It Matters | Information to Check |
|---|
| Size | Affects appearance, closure feel and compatibility with the application surface. | Check sizes such as 10.5 mm / 0.41 in, 12.5 mm / 0.49 in, 15 mm / 0.59 in, 17 mm / 0.67 in and 19 mm / 0.75 in. |
| Top Cap Material | Defines the visible colour and design appearance of the snap button. | Check whether the product is fully plastic or plastic cap only. |
| Bottom 3 Parts Material | Important for installation and technical performance. | Bottom parts may be plastic, brass, stainless steel or iron depending on the product. |
| Snap System | Determines which setting die or application tool should be used. | Check whether the product is 54 system, 61 system, Alpha, coin type or fully plastic snap system. |
| Fabric or Surface Thickness | Affects how the snap sits, closes and performs after installation. | Light fabric, thicker textile, bags and accessory surfaces should be evaluated separately. |
Plastic Snap Fastener Sizes and Typical Uses
Plastic snap buttons are available in different sizes for different applications. Smaller sizes are usually selected for babywear, children’s clothing and lightweight textile projects. Larger sizes such as 15 mm / 0.59 in, 17 mm / 0.67 in and 19 mm / 0.75 in can be evaluated for coats, jackets, bags, home textiles, craft projects and more visible closure points.
| Size | Typical Application | Selection Tip |
|---|
| 10.5 mm / 0.41 in | Babywear, children’s clothing, shirts, light textiles and craft projects | Can be considered for smaller and lighter closure points. |
| 12.5 mm / 0.49 in | Children’s clothing, light outerwear, home textiles and accessories | Provides a more visible appearance compared with 10.5 mm / 0.41 in. |
| 15 mm / 0.59 in | Coats, jackets, shirts, home textiles, bags and accessory products | The product structure should be checked as fully plastic or plastic cap with metal bottom parts. |
| 17 mm / 0.67 in | Outerwear, bags, thicker textiles and stronger closure areas | Snap system and setting die compatibility should be checked before use. |
| 19 mm / 0.75 in | Coin type snap buttons, bags, accessories, outerwear and visible closure points | Cap structure, bottom parts material and compatible die should be evaluated together. |
Where Are Plastic Cap Snap Buttons Used?
Plastic cap snap buttons can be used when a softer, colour-matched or non-metal visible cap appearance is desired. They are suitable for babywear, children’s clothing, shirts, lightweight outerwear, home textiles, craft projects, bags and accessory applications. The plastic cap can help the snap visually blend with the fabric or create a specific colour accent in the design.
A plastic cap snap button does not always mean that the entire snap set is plastic. In many models, the visible cap is plastic while the lower connection parts are metal. The bottom parts material should be checked on the product page before selecting the final snap fastener.
Where Are Fully Plastic Snap Fasteners Used?
Fully plastic snap fasteners can be considered for lightweight applications, colour-focused designs and projects where a full plastic structure is preferred. These models can be used in children’s textiles, craft products, light fabrics, selected home textile projects and decorative closure areas.
Proper installation is important for fully plastic snap fasteners. An unsuitable die or excessive pressure may cause the parts not to sit correctly. For this reason, the setting die should be selected according to the snap size and product structure.
Setting Die and Application Tool Compatibility
Plastic snap fasteners should be installed with a setting die that matches the size, snap system and product structure. Fully plastic snap fasteners and plastic cap snap buttons with metal bottom parts should not automatically be treated as the same application system. 54 system, 61 system, Alpha, coin type and fully plastic snap models should be checked individually for die compatibility.
For compatible molds, dies and application equipment, visit the setting dies, fastening molds and application tools category. Depending on the product group and production volume, snap fastener dies can be used with hand striking tools, hand presses, impact presses, electric machines or pneumatic machines.
Related Snap Fastener Categories
For a broader comparison of snap button types, visit the snap fasteners and snap buttons category. If plastic cap snap buttons are not the right option for your project, other material and system groups such as stainless snap fasteners, brass snap fasteners, iron metal snap fasteners, zinc alloy snap fasteners, magnetic snap buttons, prong snap fasteners, coat snap buttons and Deluxe snap buttons can also be evaluated from the main snap fastener category.
Wholesale and Retail Plastic Snap Fasteners
E-Dugme offers plastic snap fasteners for retail needs, sewing workshops, children’s clothing producers, babywear manufacturers, bag makers, craft suppliers and textile accessory buyers. When buying wholesale plastic snap buttons, unit price is not the only factor. Product structure, pack quantity, colour continuity, bottom parts material, snap system and compatible die availability should also be considered.
The correct plastic snap fastener improves the appearance, closure function and usability of the finished product. Choosing the wrong size, wrong snap system or incompatible setting die may cause weak closure, surface deformation or installation errors. For this reason, size, material, part structure and application information should be checked carefully before ordering.
Frequently Asked Questions
What are plastic snap fasteners?
Plastic snap fasteners are closure components used in textiles, babywear, children’s clothing, bags, craft projects and home textiles. Depending on the product, all parts may be plastic or only the visible cap may be plastic with metal bottom parts.
Are fully plastic snap fasteners and plastic cap snap buttons the same?
No. Fully plastic snap fasteners have plastic cap, socket, stud and bottom parts. Plastic cap snap buttons have a plastic visible cap, while the bottom 3 parts may be brass, stainless steel or iron depending on the product.
Which materials can be used for the bottom parts of plastic cap snap buttons?
Depending on the product model, the bottom 3 parts of plastic cap snap buttons may be made of brass, stainless steel or iron. This information should be checked before choosing the product.
Which sizes are common for plastic snap fasteners?
Common sizes in this category include 10.5 mm / 0.41 in, 12.5 mm / 0.49 in, 15 mm / 0.59 in, 17 mm / 0.67 in and 19 mm / 0.75 in. Size selection should be made according to the application area, fabric thickness and desired cap appearance.
Do plastic snap fasteners require a setting die?
Yes. Press-fit plastic snap fasteners should be applied with a compatible setting die. Fully plastic snap fasteners and plastic cap snap buttons with metal bottom parts may require different die compatibility depending on the product structure.
Can plastic snap buttons be used for babywear and children’s clothing?
Plastic snap buttons can be used in babywear, children’s clothing and light textile products. Size, fabric thickness, product structure and setting die compatibility should be evaluated together before use.
E-Dugme Plastic Snap Fasteners Category
In the E-Dugme plastic snap fasteners category, you can compare fully plastic snap fasteners and plastic cap snap buttons with different sizes, colours, systems and pack options. With the correct size, correct part structure and compatible setting die, babywear, children’s clothing, bags, home textiles, craft projects and accessory applications can achieve a cleaner and more professional closure result.
-no5-k0010%20(3).jpg-590x590.webp "Eyelets and Grommets")
.jpg-590x590.webp "Rivets")
.jpeg-100x100.webp "Plastic Light Beige 15 mm -0,59")
.jpeg-100x100.webp "15 mm - 0,59")
.jpeg-100x100.webp "Snap Fastener Set with Cap Plastic15 mm - 0,59")
.jpeg-100x100.webp "Snap Fastener 15 mm - 0,59")
.jpeg-100x100.webp "Snap Fastener Set with Cap Plastic15 mm - 0,59")
.jpeg-100x100.webp "Snap Fastener Set with Cap Plastic 17 mm - 0,67")
.jpeg-100x100.webp "12.5 mm Snap Fastener Set 0,49")
.jpeg-100x100.webp "Snap Fastener Set with12.5 mm - 0,49")
.jpeg-100x100.webp "15 mm Snap Fastener Set with 0,59")
.jpeg-100x100.webp "15 mm Snap Fastener Set with 0,59")
.jpeg-100x100.webp "15 mm Snap Fastener Set with 0,59")
.jpeg-100x100.webp "15 mm Snap Fastener Set with 0,59")
.jpeg-100x100.webp "15 mm Snap Fastener Set with 0,59")
.jpeg-100x100.webp "15 mm Snap Fastener Set with 0,59")
.jpeg-100x100.webp "15 mm Snap Fastener Set with 0,59")
