Large Parrot Snap Hook – 10.3 mm (0.41 in) Strap Opening SB17090

A Large Spring-Gate Parrot Hook for Detachable Accessories

This large parrot snap hook is a zamak spring-gate clasp for connecting keychains, compact bag straps and compatible textile accessories to a suitable ring or eye. The prominent metal body is 46 mm (1.81 in) long and 21 mm (0.83 in) wide, but the lower strap opening measures only 10.3 mm (0.41 in). Its internal hook cavity measures 13.6 × 26.8 mm (0.54 × 1.06 in). These dimensions describe separate parts of the product and must not be substituted for one another.

Sizing a Strap to the 10.3 mm Loop

The product's “large” designation refers to the overall hook body, not a 30 mm (1.18 in) webbing passage. The strap or folded leather tab passes through the lower 10.3 mm (0.41 in) attachment width. A nominally 10 mm (0.39 in) strap can still become too bulky when folded, stitched or reinforced, so the final assembled material should be tested. The hook cavity is a different opening that receives the mating metal ring.

On a finished bag or keychain, check whether the ring wire fits through the spring gate and has sufficient clearance after the gate closes. A ring's outer diameter alone does not determine its compatibility. Wire thickness, orientation and gate travel matter, particularly when an accessory may rotate or pull against the clasp at an angle.

Zamak Body and Three Metallic Finish Choices

According to the technical record, the base metal is zamak. The listed finish options are Nickel (silver tone), Gunmetal / Black Nickel (dark grey tone, also called Füme in Turkish) and Gold (gold-coloured finish). Gold may carry a selectable price adjustment; refer to the live option price rather than a fixed claim in the product description. Finish names do not imply a different alloy, stainless-steel construction or certified corrosion performance.

When selecting hardware for the same collection, compare a physical finish sample against zipper hardware, keyrings and bag buckles. Lighting and photography affect perceived colour, and a very dark Black Nickel coating can look closer to black or grey depending on the surface. No certified pull load, salt-spray result or cycle-life figure has been confirmed for this specific hook.

Using the Spring Gate and Checking Attachment Safety

Press the spring gate only as required to admit a compatible connection point; do not bend the mechanism beyond its normal travel. On release, the gate should return to its closed position. During incoming inspection, test several units for smooth gate return, surface burrs and alignment. After assembling a strap or keychain, make sure the connected ring does not hold the gate partly open.

This is an accessory hook, not a rated climbing carabiner, personal fall-protection connector or guaranteed heavy-load fitting. If the connection will carry a safety-critical load or work in prolonged wet outdoor conditions, select a purpose-rated part and test the whole assembly. Describing a product as useful in a bag or outdoor-inspired design does not certify its performance for tarpaulin anchoring or life-support equipment.

Match a Ring or Consider a Different Hook Geometry

For a smaller hardware footprint, compare the small-size parrot hook; its own strap opening and external size differ. An alternative parrot hook with a lower ring offers another attachment shape. Neither is automatically a drop-in substitute for the 10.3 mm (0.41 in) loop in this model.

A keyring may also complete the design, but verify the ring's cross-section rather than treating a nominal 20 mm or 25 mm outside diameter as proof of compatibility. If the mating ring is too thick for the gate, forcing it may deform the mechanism or compromise closing action.

From Sample Assembly to a Repeat Purchase Order

The hook itself is not installed with a snap fastener press. A woven or leather strap is threaded through its lower loop, then its end is stitched, riveted or otherwise secured using a method suitable for that specific strap. Any riveting tooling relates to the strap-end construction, not to the hook's spring gate. Build a finished sample before production: check seam bulk, strap movement, ring clearance and the gate's operation under normal intended handling.

The recorded minimum order is 100 pieces, with quantity price breaks at 1,000 and 2,500 pieces. Use the live color and price selectors for the current order. For custom finish discussions, provide an approved sample, intended quantity and mating strap or ring details so the correct hardware can be evaluated.

Technical Specifications

Frequently Asked Questions

Does large size mean a 3 cm (1.18 in) strap opening?

No. The actual loop is 10.3 mm (0.41 in) wide. The full body is 46 mm (1.81 in) long.

What is the overall exterior size?

46 × 21 mm (1.81 × 0.83 in).

How large is the hook cavity?

13.6 × 26.8 mm (0.54 × 1.06 in), distinct from the lower strap opening.

Is the hook stainless steel?

No. The catalog lists zamak metal, with selectable surface finishes.

Are Gunmetal and Black Nickel different materials?

No. They refer to the same dark metallic finish family for this model.

Will any 10 mm webbing fit?

Not necessarily. Test a folded and stitched sample, since added thickness can reduce clearance.

Do I need a snap-setting die?

No. The strap end is attached separately by the chosen sewing or riveting method.

Is it rated for climbing or heavy loads?

No verified load rating is provided. Do not use it for life-safety or unsupported critical loads.