60 cm / 23.62 in T6 Molded Tooth Open-End Separating Zipper for Jackets and Coats EPR0060T6

This 60 cm / 23.62 in T6 molded tooth open-end separating zipper is a ready-length zipper for jackets, light coats, vests, hoodies, sweatshirts and zip-front outerwear. It is made for garments that require a fully opening front closure.

The open-end separating construction allows the zipper to separate at the bottom when fully opened. This makes the garment easier to wear, remove and repair compared with a closed-end zipper, which remains joined at the lower end.

Designed for Jackets, Vests and Light Outerwear

Jackets, vests and hoodies need a zipper that matches the actual front closure route. The 60 cm / 23.62 in length should be checked against the garment pattern, not the total garment length.

Molded Tooth Construction

Molded tooth zippers create a more visible and structured zipper line than fine coil zippers. This makes them suitable for casual jackets, light coats, vests, sportswear-inspired garments and zip-front sweatshirts where the zipper is part of the visible design.

For very lightweight fabrics, test the zipper in a sample garment before production. The tooth size, tape structure and overall zipper appearance should match the fabric weight and garment style.

Measure Before Sewing

Measure from the neckline or collar start point down to the finished hem. Include seam allowance, lining, ribbing, front placket and hood construction before selecting the zipper. Test one sample garment before production to check zipper movement and front-panel alignment.

Standard Molded Zipper, Not Waterproof

This is a standard molded tooth zipper. It is not TPU-coated or waterproof. For rainwear, outdoor apparel or moisture-exposed garments, choose a suitable water-resistant zipper together with the complete garment construction.

Custom Zipper Requests

For a different length, tape color, slider style, branded pull or project-specific zipper requirement, contact us with your garment type, target zipper length, fabric details and estimated quantity.