50 cm / 19.69 in T6 Crocodile Tooth Molded Sweatshirt Zipper, Open-End Separating EPR0050T6TMS

What Is a 50 cm / 19.69 in T6 Crocodile Tooth Sweatshirt Zipper Used For?

A 50 cm / 19.69 in T6 crocodile tooth molded sweatshirt zipper is used in sweatshirts, hoodies, children’s jackets, short cardigans, vests and lightweight outerwear where the front opening needs to separate completely.

The open-end separating structure allows the left and right zipper tapes to come apart at the bottom, making it suitable for garments that open fully at the front.

Crocodile Tooth Molded Zipper Appearance

A crocodile tooth molded zipper has a more distinctive tooth shape than a standard molded zipper. The tooth line looks more pronounced and gives the garment a stronger, sportier front detail.

This tooth appearance can be selected not only for function, but also as a visible design element on hoodies, sweatshirts, children’s jackets, casual jackets and sportswear.

What Does Open-End Separating Mean?

An open-end separating zipper has a bottom separator that allows both zipper sides to come apart completely. This structure is used in hoodies, jackets, cardigans, vests and similar garments where the front opening needs to open fully.

A closed-end zipper keeps the bottom fixed. Closed-end zippers are used for trousers, skirts, pockets, bag compartments and openings that should not separate at the bottom.

Where Is the 50 cm / 19.69 in Length Used?

The 50 cm / 19.69 in length can be used for short or medium front openings. It is suitable for children’s jackets, short hoodies, short cardigans, vests, sports tops, small-size outerwear and lightweight jackets.

This length is longer than very short children’s zipper lengths and shorter than full adult jacket zipper lengths. The real front opening line should be measured together with the neckline start point, lower edge, rib thickness and seam allowance.

T6 Molded Sweatshirt Zipper Structure

This product belongs to the T6 zipper group. It is listed as a molded sweatshirt zipper, and the material can be described as molded plastic.

The T6 structure can be selected for sweatshirts and lightweight outerwear where a visible zipper line and practical use are needed. The crocodile tooth form makes the zipper more noticeable on the garment.

Use in Sweatshirts and Hoodies

In short or medium-length hoodies and sweatshirts, this open-end zipper allows the front opening to separate fully. This makes the garment easier to put on and take off.

The neckline, hood seam, ribbed hem and front placket alignment should be considered when choosing the zipper length.

Use in Children’s Jackets, Vests and Short Cardigans

In children’s jackets, baby and kids’ vests, short cardigans and lightweight outerwear, an open-end separating zipper allows the front opening to separate fully at the bottom.

The crocodile tooth appearance can make the zipper more visible as a design detail in kidswear and casual outerwear.

Sewing and Product Selection

The zipper length should be selected according to the real front opening line, not only according to the garment type. For zipper replacement, the existing zipper should be measured from the top stopping point down to the bottom separating part.

During sewing, both zipper tapes should be aligned evenly. The zipper tape should not be overstretched during stitching, because this may affect the front placket appearance.

Product Type Clarification

This product is an open-end separating crocodile tooth molded sweatshirt zipper. It is different from a closed-end zipper, invisible zipper, trouser zipper, pocket zipper, zipper chain by the meter or two-way separating zipper.

If the bottom of the opening must stay fixed, a closed-end zipper should be selected. For longer hoodies or jackets, longer open-end zipper options can be reviewed.

Common Questions Before Ordering

Is this zipper open-end?

Yes. It is an open-end separating zipper and separates completely at the bottom.

What is the zipper length?

The zipper length is 50 cm / 19.69 in.

Which zipper type is it?

It belongs to the T6 zipper group.

What is the material?

The material can be described as molded plastic.

What does crocodile tooth mean?

It describes a molded zipper tooth shape that looks more distinctive and pronounced than a standard molded zipper tooth line.

Can it be used for hoodies?

Yes. It can be used for short or medium-length hoodies and sweatshirts.

Can it be used for children’s jackets?

Yes. It can be used in children’s jackets, short cardigans, baby and kids’ vests and lightweight outerwear.

Is it suitable for pockets or trousers?

For pockets, trousers, skirts and fixed-bottom openings, a closed-end zipper should be selected. This product is an open-end separating zipper.

Is it a two-way zipper?

No. This product is a single-slider open-end separating zipper. For two-slider bottom-opening use, a two-way open-end zipper should be selected.

What is the minimum order quantity?

The minimum order quantity is 5 pcs.

How should the zipper be measured for replacement?

The old zipper should be measured from the top stopping point to the bottom separating part. For new production, the real front opening line on the pattern should be used.