35 cm / 13.78 in #4.5 Open-End Jacket Zipper, Powder Pink Tape, Nickel-Finish Metal Teeth ZPM0035D45

Powder Pink Open-End Jacket Zipper with Metal Teeth

This jacket zipper has a length of 35 cm / 13.78 in, a #4.5 chain size, powder pink tape and nickel-finish metal teeth. Its open-end construction allows both sides to separate completely, making it suitable for cardigans, short jackets, leather jackets and similar front-opening garments.

The silver-toned nickel finish creates a visible contrast against the powder pink zipper tape. The zipper can therefore function as both a closure component and a visible design detail.

When Should This Zipper Be Selected?

• When a 35 cm / 13.78 in jacket zipper is required,
• When the garment must open completely at the front,
• When powder pink zipper tape is preferred,
• When visible nickel-finish metal teeth are required,
• When a #4.5 metal-tooth chain size is needed,
• For replacing a zipper on a cardigan, short jacket or leather jacket.

Technical Specifications

Difference From Similar Zippers

Unlike closed-end trouser and skirt zippers, this model has a separating bottom. The insertion pin can be removed from the retaining box, allowing both sides of the garment to separate completely.

Its metal teeth remain visible, unlike an invisible zipper. It also differs from moulded plastic and nylon coil zippers through its genuine metal-tooth construction.

Incorrect Selection Warning

• Measure the zipper opening on the garment before sewing.
• Do not substitute an open-end zipper where a closed-end zipper is required.
• Do not assume that zippers of the same length have the same chain size.
• Compare the retaining box and insertion-pin orientation with the original zipper.
• Allow for minor colour variation between screens and production batches.
• Complete a sample sewing and operating test before production.

Applications

• Cardigans and knitted outerwear
• Short women’s jackets
• Leather and synthetic leather jackets
• Children’s jackets
• Front-opening vests
• Costume and stage garments
• Garment repair and zipper replacement
• Designs featuring a visible metal zipper

Leather and Synthetic Leather Applications

This zipper may be used on leather or synthetic leather when its length, #4.5 size and open-end construction match the garment pattern. Needle holes in leather may remain permanent, so alignment should be completed carefully before sewing.

Care Guidance

• Insert the pin fully into the retaining box before moving the slider.
• Do not force the slider if fabric, lining or thread is caught between the teeth.
• Follow the care instructions of the main garment fabric.
• Do not apply a hot iron directly to the metal teeth.
• Do not store the zipper in damp conditions.
• Allow it to dry completely after washing.

Package Contents

• 1 × 35 cm / 13.78 in #4.5 open-end jacket zipper with powder pink tape and nickel-finish metal teeth

The garment, fabric and sewing materials are not included.

Frequently Asked Questions

What is the zipper length?

The zipper length is 35 cm / 13.78 in. Measure the garment opening separately before sewing.

Is this an open-end zipper?

Yes. Both sides can separate completely at the bottom.

What is the zipper size?

The zipper chain size is #4.5.

Are the teeth metal?

Yes. The zipper has metal teeth with a nickel-colour finish.

What colour is the zipper tape?

The zipper tape is powder pink. Slight variations may occur because of screen settings and production batches.

Can it be used on a leather jacket?

Yes, provided that the 35 cm / 13.78 in length, #4.5 size and open-end construction match the jacket pattern.

Can it be used as a trouser zipper?

Generally no. This is an open-end jacket zipper, while trousers normally require a closed-end zipper.

How many zippers are included?

The package contains one zipper.

Content updated: 29 July 2026 — E-Düğme