33 Series Brass Double-Cap Rivet, 7 mm / 0.276 in Caps, 7.5 mm / 0.295 in Post, 1000 Pieces R0033PR

33 Series Brass Double-Cap Rivet

This compact brass rivet is designed for products where both sides of the fastening point remain visible. Its matching front and back caps create a clean metal appearance on wallets, card holders, small bags, lightweight leather goods and fashion accessories.

Both caps measure 7 mm / 0.276 in. The post length is 7.5 mm / 0.295 in and must be checked against the total thickness of the material stack before installation.

When Should This Rivet Be Selected?

• When a finished cap appearance is required on both sides,
• When compact 7 mm / 0.276 in caps are preferred,
• When a 7.5 mm / 0.295 in post suits the material stack,
• When brass is preferred instead of steel,
• For wallets, card holders and small leather accessories,
• When a package of 1000 rivets is required.

Technical Specifications

Difference From Similar Rivets

R0033PR is a brass double-cap rivet. It differs from single-cap rivets because it provides a decorative cap on both the front and reverse sides.

It must not be confused with larger 33.5 series rivets or with 33 series steel rivets. Material, cap construction and setting-die compatibility must be checked separately.

Selection and Installation Warning

• Measure the total material stack.
• Confirm that the post provides sufficient setting allowance.
• Use the KLP0033CFT-7 double-cap rivet die.
• Position both caps in their correct directions.
• Check die alignment before applying pressure.
• Start with low press force.
• Complete a sample installation before production.

Applications

• Wallets and card holders
• Small leather and synthetic-leather bags
• Key holders and leathercraft
• Belt and strap details
• Footwear accessories
• Textile and fashion accessories
• Small visible fastening points

Package Contents

Total package quantity: 1000 brass double-cap rivets.

The setting die, press, manual holder and hole-cutting equipment are not included.

Compatible Setting Equipment

A KLP0033CFT-7 setting die is required to support both caps during installation. For repeated workshop applications, the die can be used with a compatible manual hand press. A compatible hammer holder may be considered for samples and small repairs.

Frequently Asked Questions

What are the cap diameters?

Both the front and back caps measure 7 mm / 0.276 in.

What is the post length?

The post length is 7.5 mm / 0.295 in.

Is this a double-cap rivet?

Yes. It creates a decorative cap appearance on both sides.

What material is it made from?

The rivet is made from brass.

Can a single-cap die be used?

No. A die designed for 33 series double-cap rivets is required.

Which setting die is compatible?

The compatible setting die is KLP0033CFT-7.

Is it suitable for thick leather?

Suitability depends on total material thickness. Select a longer-post model if 7.5 mm / 0.295 in is insufficient.

How many pieces are included?

The package contains 1000 rivets.

Are setting tools included?

No. The setting die, press and cutting equipment are supplied separately.

Content updated: 30 July 2026 — E-Düğme