14 mm / 0.55 in 22L Perforated Nickel-Plated Brass Jeans Button Fixed Cup 100 Pieces DK00014DDUZPPROMO

14 mm / 0.55 in Perforated Jeans Button

This 14 mm / approximately 0.55 in, 22L perforated jeans button is a press-set metal garment button for jeans, denim jackets, coats, waistcoats, skirts, shorts and similar textile products. It is made from brass and has a nickel-plated silver-tone finish.

The product specifications identify the button as having a perforated design and fixed-cup construction. The exact number, position and shape of the opening must be confirmed from real product photographs before publication.

When Should This Button Be Selected?

• When a 14 mm / 0.55 in jeans button is required
• When the garment specification calls for a 22L button
• When a perforated rather than logo-face design is preferred
• When a nickel-plated silver-tone finish suits the garment
• When a fixed-cup press-set button is required
• For jeans, denim jackets, skirts, shorts and workwear

Size and Construction

What Does 14 mm / 22L Mean?

The 14 mm / 0.55 in measurement refers to the visible diameter of the upper button section. The 22L value is the corresponding ligne size used for garment buttons.

Selection should also consider the buttonhole, waistband or placket thickness, total material layers, lower fastening component, cup profile and exact setting die.

What Does Perforated Mean?

The product is described as having a perforated construction. Because the current product page does not show a real photograph, no claim should be added about the precise hole count, position or decorative shape.

The term perforated must not be interpreted as confirming that this is a conventional sew-through button.

Not a Standard Sew-Through Button

The product is listed in the jeans-button category and is paired with a dedicated jeans-button setting die. It is installed as a press-set garment component using a compatible lower fastener and setting die.

Fixed-Cup Construction

In a fixed-cup jeans button, the connection area below the visible section does not move independently. The lower die must support the fixed cup and keep the button centred during installation.

A die made for another 14 mm jeans button may use a different upper cavity or lower support profile and must not be assumed to fit automatically.

Difference from Similar Jeans Buttons

This model is defined by its 14 mm / 22L size, perforated form, nickel finish and fixed-cup construction.

It is not the same as a star-logo, wreath-logo, XSide-logo or Denim Wear logo button. It also differs from plastic-cup, swivel-cup, stainless-steel and zinc-alloy buttons.

Typical Applications

• Jeans waistbands
• Denim jackets and coats
• Denim skirts and shorts
• Waistcoats and overalls
• Gabardine and heavy cotton trousers
• Workwear garments
• Denim bags and textile accessories
• Button replacement and repair work

Selecting the Correct Setting Die

Use a 14 mm / 22L custom jeans-button setting die prepared for the actual perforated cap and fixed-cup construction.

Provide the exact jeans-button reference when ordering the setting die. Diameter alone does not confirm that the upper and lower die profiles will support the button correctly.

Checks Before Installation

• Confirm the 14 mm / 0.55 in button diameter.
• Check that the garment buttonhole suits the button.
• Seat the perforated upper section level inside the die.
• Confirm that the lower die supports the fixed cup.
• Select the lower fastener for the total material thickness.
• Adjust pressing force gradually.

Package Contents

• 100 perforated 14 mm / 0.55 in nickel-finish jeans buttons

The setting die and press are not included. Confirm whether the lower fastening component is supplied by checking the physical package.

Related Products and Categories

• Custom 14 mm / 22L jeans-button setting die
• Jeans-button models
• Jeans-button setting tools

Frequently Asked Questions

Content last updated: July 23, 2026 — E-Düğme