80 cm (31.50 in) T5 Coated-Tooth Molded Plastic Separating Zipper ZPK0080T5K

80 cm (31.50 in) T5 Separating Jacket Zipper With Coated Molded Teeth

This 80 cm (31.50 in) T5 jacket zipper combines molded plastic teeth with a metallic-look surface finish and an open-end separating construction. It is an option for garment makers selecting a full-length front closure for suitable coats, jackets or other outerwear. Because the bottom section separates completely, the garment's two front panels can open independently. The visibly coated teeth can also work as an accent alongside other metallic-looking trims, but the coating does not turn plastic teeth into solid metal hardware.

The product record identifies the T5 size class and an 80 cm (31.50 in) ready-made length. Zipper tape, tooth finish and slider are separate selections. For reliable purchasing, evaluate all three together with the actual garment pattern, required end construction and finished fabric thickness. Similar-looking zippers can differ in slider action or bottom-stop construction, so outside appearance alone is not sufficient to determine compatibility.

Coated Molded Plastic Teeth Versus Metal Teeth

The teeth are molded plastic, sometimes called chunky or bone-style teeth in textile trade terminology. They engage as individual molded elements, rather than the continuous coil of a nylon spiral zipper. The metallic-looking surface color is a coating or finish choice. Available tooth finish records include matte silver, shiny nickel, matte gold, shiny gold, matte black and dark black nickel, plus other finish descriptions. These names describe appearance and should not be interpreted as proof that the teeth are brass, steel or another metal.

A coated molded zipper may suit an outerwear design seeking a more prominent tooth line than a subtle spiral zipper. Consider how the finish contrasts with the fabric tape and whether it coordinates with zipper pulls, snap fasteners or buckles. Photographs can make metallic finishes look brighter or darker than they do in person. Use an approved sample when matching production runs. No specific abrasion, salt-spray, wash-cycle or heat-resistance test results for the coating have been confirmed for this listing, so do not assume a certified performance level.

What the 80 cm Length and Open-End Construction Mean

The zipper has a listed finished length of 80 cm (31.50 in), but the correct choice must be based on the garment's actual opening length and seam allowances. Before ordering hundreds of units, compare the intended zipper line to the pattern from neckline to hem, allowing for any bottom extension, collar and finishing details. A zipper that is nominally the right size but incorrectly positioned may cause puckering or poor alignment when the jacket is zipped.

Separating/open-end means the two tapes can disconnect at the bottom and rejoin through the bottom insertion mechanism. This feature distinguishes a jacket front zipper from a closed-end zipper commonly used in a pocket or pouch. It does not, by itself, establish a two-way design. A two-way zipper requires the correct construction and slider arrangement, and that functionality should be specifically verified rather than inferred from a product option label.

Choose the Tape Color and Tooth Finish Separately

The product options offer several tape colors, including black, white, red, dark brick, petrol green, military green, khaki, blue, light blue, navy and pink. Some colors may carry zero available quantity in the catalog even while the overall zipper product is active. A special customer color option does not automatically mean that custom colors are immediately in stock. Always check the selected tape color and finish combination before confirming a production quantity.

Tooth finishes are listed independently of the woven tape colors. For a dark jacket, black or navy tape may give a continuous placket appearance, while a silver or gold-looking tooth finish can create a deliberate contrast. For coordinated outerwear ranges, confirm the physical metal-look color next to the garment's other accessories. Supplier photos and lighting are useful guides, but not a substitute for an approved finishing sample when color consistency is critical.

Kombi and Hook-Style Slider Choices

The recorded slider choices include Kombi and hook-style (Kancalı). A slider is the moving component that brings the zipper teeth together or separates them. It is distinct from the puller or tab used by the wearer to operate the slider. The listed slider choice should be checked for intended jacket use, attachment details and ease of operation. The term “Kombi” is part of this product's catalog options and, standing alone, does not verify a two-slider, two-way zipper. If opening from the bottom while the top remains joined is a functional requirement, confirm the exact slider count, bottom mechanism and sample before production.

For garment manufacturing, the easiest-to-grip puller is not always the best choice for an entire collection. Its shape should suit the jacket design without snagging neighboring trims or fabric. Try opening and closing a sample while wearing the finished garment; assess whether the zipper insertion pin seats correctly and whether the slider moves smoothly without folding the zipper tape into the tooth path.

Sewing and Quality Checks for Outerwear

Start with the garment pattern, not an estimated zipper length. Align the right and left zipper tapes along the front opening and keep the bottom ends level. On padded or lined coats, control the fabric layers so that the zipper line does not stretch relative to the garment panels. Uneven stitching tension, excessive seam bulk or misaligned bottom parts can make a separating zipper difficult to engage. Test the placket with the actual fabric, lining, interfacing and topstitching, rather than with a single flat swatch.

Protect coated teeth from direct abrasion during sewing, pressing and packing. Heat or cleaning methods appropriate for one coating should not be assumed safe for every finish. The manufacturer's tested heat and cleaning tolerances have not been verified for this item. Before a production run, inspect the zipper's tooth alignment, sliding resistance, bottom separation/re-engagement, visible surface marks and completed appearance when the jacket is closed. A signed-off sample can serve as the standard for repeat orders.

Ordering by Piece and Quantity Breaks

This product is a ready-made 80 cm (31.50 in) zipper sold by piece, not a continuous zipper chain by the meter or foot. The recorded minimum order is 200 pieces, with quantity discount breakpoints at 500 and 1,500 pieces. These quantities count complete ready-made zippers. No fixed number of pieces per package has been verified for this listing, so a conversion such as “four packs” should not be presented as a product fact.

When preparing a purchase order, record the tape color, tooth finish, slider style and intended separating function as separate fields. If you are matching an existing jacket line, send the actual zipper sample, approved finish or trim reference and expected production volume. Order confirmation should include the final available option combination rather than relying solely on the general product's stock quantity.

Comparing Standard and Coated T5 Zippers

If a metallic-looking tooth finish is not required, the standard 80 cm T5 molded separating zipper may be a more suitable visual choice. Standard 75 cm (29.53 in) and 85 cm (33.46 in) separating molded zipper models are also available in the catalog for different front-opening lengths. These alternatives are separate products: do not assume that their tape colors, slider styles, finishes or ordering conditions are the same as this coated-tooth model.

For a sound selection, compare the required garment opening length, separating versus closed-end construction, plastic molded versus coil or metal teeth, finish color and slider mechanism. If a project requires a true two-way separating action, request explicit confirmation of the bottom-opening construction rather than relying on a generic slider name. Carefully matched components reduce rework and help produce a cleaner jacket front.

Frequently Asked Questions

How long is this zipper?

It is a ready-made 80 cm (31.50 in) T5 zipper. Check the jacket's actual front-opening length and seam allowance before ordering.

Are the teeth solid metal?

No. They are molded plastic teeth with a metallic-looking finish. The finish does not change the underlying tooth material.

What does open-end or separating mean?

The zipper tapes can separate completely at the bottom, which makes the construction suitable for a jacket front that opens fully.

Is Kombi automatically a two-way zipper?

No. Kombi is a slider option in the product record; a two-slider, bottom-opening zipper function must be verified separately.

Can I choose tape color and tooth finish separately?

The listing has separate options for tape color and tooth finish. Some colors may not be available for immediate purchase.

Is the zipper sold by the meter?

No. This item is sold as a complete 80 cm (31.50 in) ready-made zipper by piece.

What is the minimum order quantity?

The catalog records a 200-piece minimum, with price breaks at 500 and 1,500 pieces.

Is every color shown in the menu currently available?

Not necessarily. Some option values show zero stock; review the selected color and finish before confirming the order.

Can I use this as a pocket zipper?

It is an open-end separating jacket-style zipper. A pocket may need a closed-end zipper, so choose the end construction for the specific application.

Are washing and ironing resistance ratings provided?

No confirmed coating-specific wash, abrasion or heat ratings are listed. Test the zipper under the intended garment care and production conditions.