Hook and Eye Buckle Frog Fasteners 7,5 mm E 1762

7.5 mm zinc-alloy hook-and-eye clasp – E 1762

Fastening choice for the garment

For dressmakers producing selected skirt, trouser and jacket closures, E 1762 offers a fastening alternative where the opening should remain visually controlled. The closure needs to be assessed on the finished fabric layers, not only on the cutting table.

Where it earns its place

A well-positioned clasp can support a clean jacket or dress opening without adding an unwanted button detail. The 25 mm (0.98 in) overall length calls for adequate fastening space. Confirm the hook remains accessible and does not snag the facing.

Measurements that matter

Verified product measurements: 7.5 mm (0.30 in) width; 25 mm (0.98 in) overall length; 5 mm (0.20 in) hook height. These figures refer to different parts of the component. The nominal width is not a statement of tensile strength, and the overall length must be considered when positioning the fastening behind the garment edge.

Pattern and fit decisions

Test the clasp on the completed garment front, including interfacing and facing. The hook should close without pulling the outer fabric into a crease. If the pattern has a narrow edge, compare the component's full length with the available space.

Working with fabric and lining

Fabric thickness affects how the hook sits. A soft bouclé may need local reinforcement, while a fine dress fabric calls for discreet stitching. Verify the fixing points on the physical component and avoid assuming that a press-setting tool can be used.

Matching the receiving part

The receiving eye or counterpart is a functional part of the closure. Match its shape to the hook, then test repeated opening and closing on the real garment. Components from other model numbers are not automatically interchangeable, even when their nominal dimensions look similar.

Selecting a finish and quantity

Select the finish in relation to the other metal trims and the garment's intended appearance. Check the live product options on E-Düğme for available colours and pack quantities. An approved physical sample helps avoid shade differences across a collection.

Practical comparison with alternatives

Choose between compact and broader models according to the pattern's fastening allowance and the mating piece. Compare overall length and hook profile as well as width. Changing model numbers without a fitting test can create avoidable alterations.

Questions buyers ask

Is 7.5 mm the entire clasp length? Check the measurement list above; width and overall length are separate. Will any receiving eye work? No, confirm the actual fit. Is it right for heavy outerwear? Only after testing the finished garment. Can I press-set it? Do not assume press compatibility without a verified attachment method.

Frequently Asked Questions About the 7.5 mm Clasp

Is 7.5 mm the overall length?

No. Width is 7.5 mm (0.30 in); overall length is 25 mm (0.98 in) and hook height is 5 mm (0.20 in).

Which garments may suit it?

Selected skirts, trousers and jackets after testing on a finished sample.

Will any receiving eye fit?

No. Test the matching component's shape and opening with the actual hook.

Is a setting press required?

Do not assume press compatibility without verifying the physical attachment method.

Is the receiving eye included?

Confirm package contents before ordering.

How should I choose a finish?

Compare a physical sample with the garment's other metal trims.